Alpenföhn
120mm Wing Boost 3 ARGB High Speed PWM Fan, Single - Black

Product information - 120mm Wing Boost 3 ARGB High Speed PWM Fan, Single - Black

Alpenföhn has won over its demanding customers over the years with their range of first-class Wing Boost series fans. The Wing Boost 3 ARGB High Speed combines the many advantages of its famous predecessors with a circular ring of digitally addressable RGB-LED lighting in its outer frame. The eponymous "Wing Boosts" consist of small raised areas on the impeller intake side of the blades that help reduce air turbulence. The fan therefore operates at lower noise levels than conventional fan designs would allow. Furthermore, this high-speed variant has a specially integrated IC motor control to enable even better performance at even lower noise levels.

The Features of the Alpenföhn Wing Boost 3 ARGB High Speed Fan at a Glance:

• 120 mm fan with digitally addressable RGB lighting
• Hydrodynamic bearings for maximum performance, quiet operation and increased durability
• Optimised fan blades deliver the perfect balance between static pressure and airflow
• Premium IC motor control for minimal noise output
• Operates at 700 to 2.200 RPM with a maximal airflow volume of 132,4 m³/h
• 4-Pin PWM connection
• Compatible with ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock Polychrome

Wing Boost 3 ARGB High Speed: Powerful 120 mm Fan

The Wing Boost 3 ARGB High Speed is a PWM-controlled, 120 mm fan that is equally at home operating as a case fan, CPU cooler or radiator cooler. The fan operates at between 700 and 2.200 RPM, resulting in a massive airflow of 132,4 m³/h and a static pressure of 3,24 mm H2O.

The hydraulic bearings reduce operating noise to a minimum and this is then combined with the rubber decouplers built into the fan frame to guarantee whisper-quiet operation, even at low RPM speeds. The integrated IC motor control also assists in reducing the total noise produced at full load, with the Wing Boost 3 RGB High Speed producing at most only 36,8 dB.

Addressable RGB-LED Lighting in the Frame

The Alpenföhn Wing Boost 3 ARGB High Speed is equipped with digitally addressable RGB-LED lighting in the frame. The manufacturer integrated a glowing ring capable of producing 16,8m colours into the fan frame, which produces a delicate light on the impeller and can be connected to the motherboard or corresponding controller via a 3-pin RGB connector. The lighting of the Wing Boost 3 ARGB is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.

Technical Details:

• Dimensions: 120 x 120 x 25 mm (W x H x D)
• Material: Plastic, rubber
• Colour: Black (frame, rotor), Grey (decoupler)
• Volume: max. 36,8 dB(A)
• RPM: 700 - 2.200 RPM
• Airflow: max. 132,4 m³/h
• Static pressure: 3,24 mmH2O
• Voltage: 12 V
• Connection:
  4-Pin PWM
  3-Pin RGB (addressable)
• Lighting: RGB (16,8m colours)
• Includes:
  1x Alpenföhn Wing Boost 3 ARGB High Speed
  4x Case screws
  4x Radiator screws

Technical Details

Primary colour	black
Secondary colour	black
Fan connector	4 Pin (PWM)
Illumination	yes
Illumination colour	RGB (selectable)
LED Anschlüsse	Digital RGB (3-Pin 5VDG)
LED Kompatibilität	ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync
Max rpm (exact)	2200 U/min
Min rpm (exact)	700 U/min
Max noise level (exact)	36,8 dB(A)
Max air volume (exact)	132,4 m³/h
Max rpm	2000 - 2499 U/min
Min rpm	500 - 749 U/min
Max noise level	35 - 39 dB(A)
Max air volume	125 - 149 m³/h
Rotor diameter	120 mm
Mounting holes	120 mm

Complementary products