The
Wing Boost 3 RGB combines the many advantages of its famous predecessors with circular, addressable RGB-LED lighting embedded in the outer frame. The "Wing Boost" name comes from the small raised edges on the intake side which help reduce air turbulence. The fan therefore operates with lower noise levels than previous designs allowed. The triple-set on offer here consists of three fans, includes a RF receiver, splitter cables and a remote control for synchronising the three fans.
The Features of the Alpenföhn Wing Boost 3 RGB Fans at a Glance:
- Three 120 mm fans with digitally addressable RGB lighting
- Hydrodynamic bearings for high performance, quiet operation and max durability
- Optimised rotor blades deliver the perfect balance between static pressure and airflow
- Fan spins between 700 and 1.600 RPM
- 4-Pin PWM- and 3-pin RGB connectors
- Includes RGB- and PWM splitter, RF control and receiver as well as screws
- ASUS Aura, MSI Mystic Light, GIGABYTE RGB Fusion and ASRock Polychrome
Wing Boost 3 RGB: Powerful 120 mm Fan
The
Wing Boost 3 RGB is a
PWM-controlled,
120 mm fan that is equally suite dfor use on cases, CPU coolers or radiators. The fans work at a speed of between
700 and 1.600 RPM, meaning that
92,6 m³/h with a static pressure of
2,19 mmH2O is achieved.
The
hydraulic bearings, which enable noise to be reduced to a minimum, are combined with
rubber absorbers in the fan frame to make the fan even quieter, including at low RPM. Under full load, the
Wing Boost 3 RGB impresses once again by producing just
23,5 dB.
Adressierbare RGB-LED-Beleuchtung im Rahmen
The
Alpenföhn Wing Boost 3 RGB is equipped with RGB-LED lighting. The manufacturer includes a
16,8 m colour glowing ring which is integrated in the frame, which produces a vibrant glowing ring of RGB around the circumference. This is controlled via the 3-pin RGB connector on the motherboard or a compatible controller. The
Wing Boost 3 RGB is compatible with
ASUS Aura, GIGABYTE RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light lighting.
The bundle includes
three of
Alpenföhn's Wing Boost 3 RGB fans as well as
accessories for synchronising PWM signals with the RGB-LED lighting of the three fans. The lighting can be controlled via the included remote.
Technical Details:
- Dimensions: 120 x 120 x 25 mm (W x H x D)
- Material: Plastic, rubber
- Colour: Black (frame, rotor), grey (decoupler)
- Volume: max. 23,5 dB(A)
- RPM: 700 - 1.600 U/min
- Airflow: max. 92,6 m³/h
- Voltage: 12 V
- Connection:
4-Pin PWM
3-Pin RGB (addressable)
- Lighting: RGB (16,8 M colours)
- Accessories:
3x Alpenföhn Wing Boost 3 RGB
12x Screws for case
12x Screws for radiator
1x RF Remote
1x RF Receiver
1x RGB Splitter
1x PWM Splitter
