Alpenföhn has won over its demanding customers over the years with their range of first-class Wing Boost series fans. The
Wing Boost 3 RGB combines the many advantages of its famous predecessors with a circular ring of digitally addressable RGB-LED lighting in its outer frame. The eponymous "Wing Boosts" consist of small raised areas on the impeller intake side of the blades that help reduce air turbulence. The fan therefore operates at lower noise levels than conventional fan designs would allow.
The Features of the Alpenföhn Wing Boost 3 RGB Fan at a Glance:
- 140 mm fan with digitally addressable RGB lighting
- Hydrodynamic bearings for maximum performance, quiet operation and increased durability
- Optimised fan blades deliver the perfect balance between static pressure and airflow
- Operates at 400 to 1.050 RPM
- 4-Pin PWM connection
- Compatible with ASUS Aura, MSI Mystic Light, GIGABYTE RGB Fusion and ASRock Polychrome
Wing Boost 3 RGB: Powerful 140 mm Fan
The
Wing Boost 3 RGB is a
PWM-controlled,
140 mm fan that is equally at home operating as a case fan, CPU cooler or radiator cooler. The fan operates at between
400 and RPM, producing a massive airflow of
100,6 m³/h with a static pressure of
2,19 mmH2O.
The
hydraulic bearings reduce operating noise to a minimum and this is then combined with the
rubber decouplers built into the fan frame to guarantee whisper-quiet operation, even at low RPM speeds. At full speed, the
Wing Boost 3 RGB produces a maximum
19 dB.
Addressable RGB-LED Lighting in the Frame
The
Alpenföhn Wing Boost 3 RGB is equipped with digitally addressable RGB-LED lighting in the frame. The manufacturer integrated a
glowing ring capable of producing 16,8m colours into the fan frame, which produces a delicate light on the impeller and can be connected to the motherboard or corresponding controller via a 3-pin RGB connector. The
Wing Boost 3 RGB is comaptible with
ASUS Aura, GIGABYTE RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.
Thanks to the Y splitter integrated in the PWM connector, up to three Wing Boost 3 fans can be connected in series and controlled via a single PWM slot on the motherboard. In addition, an adapter is included that can power the fan via Molex to 2-pin, but then without the ability to control the speed.
Technical Details:
- Dimensions: 140 x 140 x 25 mm (W x H x D)
- Material: plastic, rubber
- Color: Black
- Volume: max. 19 dB(A)
- Speed: 400 - 1.050 rpm
- Airflow: max. 100.6 m³/h
- Voltage: 12 V
- Voltage range: 7 - 13,2 V
- Rated power: 1.32 W
- input current: 0.11 A
- Connection:
4-pin PWM
3-pin RGB (5VDG)
- Lighting: digitally addressable RGB LEDs (16.8 million colors)
- Includes:
1x Alpenföhn Wing Boost 3 RGB
4x Screws
4x Decouplers
1x Cable extension
1x 7V voltage adapter (Molex/2-pin)
