Alpenföhn
140mm Wing Boost 3 ARGB PWM Fans, Triple - Black

Product information - 140mm Wing Boost 3 ARGB PWM Fans, Triple - Black

The Wing Boost 3 RGB combines the advantages of its famous predecessors with a circular, addressable RGB-LED lighting embedded in its frame. The "Wing Boost" name comes from the small raised spots on the intake side of the impellers that help reduce air turbulence. The fan works especially effectively and quietly at higher RPM, something that was not always possible with earlier designs. The triple set offered here consists of three fans with an RF receiver, splitter cables and a remote control for controlling and synchronising the three included fans.

The Features of the Alpenföhn Wing Boost 3 RGB Fan at a Glance:

• Three 140 mm fans with digitally addressable RGB lighting
• Hydrodynamic bearings for high performance, quiet operation and increased durability
• Optimised rotor blades deliver the perfect balance between static pressure and airflow
• Fan speeds of 400 to 1.050 RPM
• 4-Pin PWM- and 3-Pin RGB connection
• Includes RGB- and PWM splitter, RF remote and receiver with screws
• ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock Polychrome

Wing Boost 3 RGB: Powerful 140 mm Fan

The Wing Boost 3 RGB is a PWM-controlled, 140 mm fan that is equally suited for use in cases, on CPUs, or on radiators. The fans operate between 400 and 1.050 RPM, producing an airflow of 100,6 m³/h as well as a static pressure of 2,19 mm H2O.

The hydraulic bearings reduce noise to a minimum and the rubber decouplers in the fan frame also help to guarantee whisper-quiet operation - especially at low RPM. Under full load, the Wing Boost 3 RGB produces at most 19 dB.

Addressable RGB-LED Lighting in the Frame

The Alpenföhn Wing Boost 3 RGB is equipped with digitally addressable RGB-LED lighting. The manufacturer has included a glowing ring with up to 16,8m colours, and this throws a subtle light onto the fan wheel which can then be controlled via a 3-pin RGB connector with the motherboard or a compatible controller. The Wing Boost 3 RGB is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.

In addition to three fans from the Alpenföhn Wing Boost 3 RGB series, this set includes all the necessary accessories for synchronising the PWM signal and the RGB-LED lighting. The lighting can be controlled via bundled remote control.

Technical Details:

• Dimensions: 140 x 140 x 25 mm (W x H x D)
• Material: Plastic, rubber
• Colour: Black (fan, frame), grey (decoupler)
• Volume: max. 19 dB(A)
• RPM: 400 - 1.050 RPM
• Airflow: max. 100,6 m³/h
• Voltage: 12 V
• Voltage range: 7 - 13,2 V
• Rated performance: 1,32 W
• Input voltage: 0,11 A
• Connection:
  4-Pin PWM
  3-Pin RGB (5VDG)
• Lighting: RGB (16,8m colours)
• Includes:
  3x Alpenföhn Wing Boost 3 RGB
  12x Case screws
  12x Radiator screws
  1x RF remote
  1x RF receiver
  1x RGB splitter
  1x PWM splitter

Technical Details

Primary colour	black
Secondary colour	black
Fan connector	4 Pin (PWM)
Illumination	yes
Illumination colour	RGB (selectable)
LED Anschlüsse	Digital RGB (3-Pin 5VDG)
LED Kompatibilität	ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync
Initial Voltage	7 V
Max rpm (exact)	1050 U/min
Min rpm (exact)	400 U/min
Max noise level (exact)	19 dB(A)
Max air volume (exact)	100,6 m³/h
Max rpm	1000 - 1499 U/min
Min rpm	250 - 499 U/min
Max noise level	15 - 19 dB(A)
Max air volume	100 - 124 m³/h
Rotor diameter	140 mm
Mounting holes	140 mm

Complementary products