Fatal1ty X399 Professional Gaming, AMD X399 Mainboard - Sockel TR4
- Well-equipped X399 motherboard (ATX)
- 4x PCIe x16 (x16/x16/x8/x8)
- 2x USB 3.1 (1× Type A & 1x Type C)
- 3x M.2 (PCIe 3.0 x4/SATA) & 8x SATA 6G
- 12x USB 3.0 / 4x USB 2.0
- max. 128 GB RAM to 3.600 MHz
- RGB-LEDs / ac-WiFi / 10 Gigabit LAN
Product information - Fatal1ty X399 Professional Gaming, AMD X399 Mainboard - Sockel TR4For the enthusiast processors of the Ryzen Threadripper series, AMD has created a new platform using the X399 chipset and Socket TR4. Equipped with up to 64 PCIe-lanes, as are available on the Ryzen Threadripper CPUs, X399 motherboards offer an appropriately extensive range of connectivity options, allowing up to three PCIe NVMe SSDs and up to four graphics cards for example, each using 16 and 8 lanes respectively.
PCIe NVMe SSDs on AMD's X399 motherboards are connected directly to the GPU and Threadripper reserves a whole 12 PCIe lanes for this purpose. This enables the extreme read- and write speeds of NVME M.2 and U.2 SSDs to be used as efficiently as possible, without having to delay data by diverting it through the chipset. U.2- or M.2 SSDs can be installed, with each PCIe NVMe slot coming with four PCI-Express 3.0 lanes to allow for exceptionally high data transfer rates ranging up to 32 Gbit/s, almost eight times faster than SATA 6G.
The X399 chipset on socket TR4 motherboards is connected to the processor via four PCIe lanes and the X399 platform itself supports USB 3.1 natively, meaning that as a rule no additional USB controllers are necessary to allow the board to offer ultra fast 10 Gbit/s speeds per USB port. X399 motherboards drive the RAM in the speedy Quad-Channel Mode, reaching RAM frequencies of up to 4.000 MHz depending on the motherboard.
A further feature supported by X399 motherboards is the overclocking of Ryzen Threadripper CPUs and, when paired with Socket TR4, this makes for a truly formidable enthusiast-level platform for gamers and content creators.
Features of the ASRock Fatal1ty X399 Professional Gaming in ATX FormatThe ASRock Fatal1ty X399 Professional Gaming is a motherboard using the ATX-format and provides four PCI-Express 3.0 slots for graphics cards, each pair coming with a full 16 and 8 lanes to connect them to the chipset. Further expansion cards can be installed in the individual PCIe X1 slot. Furthermore the ASRock Fatal1ty X399 Professional Gaming supports, as an X399 motherboard, AMD's CrossFire and NVIDIA's SLI technology for multi-GPU setups. Up to 128 GB DDR4 RAM can be installed in the eight memory banks, allowing the RAM to run at a maximum of 2.666 MHz natively. Overclocking allows for even higher clock frequencies up to 3.600 MHz.
Special Features of the ASRock Fatal1ty X399 Professional Gaming at a Glance:
- 4x PCIe 3.0 x16 (x16/x16/x8/x8) for high-end graphics cards
- 2x USB 3.1: Type A & Type C + 3x M.2-slot PCIe 3.0 x4
- DDR4-RAM up to 3.600 MHz in Quad-Channel Mode
- BT/WiFi module, 2x Gigabit LAN & 1x 10 Gigabit LAN
- RGB-LED lighting including RGB-LED headers
- Modern UEFI-BIOS with temperature monitoring
Data storage devices like SSDs and hard drives are managed via eight SATA 6G connectors (incl. RAID support) as well as three M.2 slots and a U.2 port, each of which is connected to the CPU via four PCI Express 3.0 lanes. M.2 SSDs from 30 to 80 mm in length can be used and, moreover, the advanced NVM Express protocol is also supported which is optimised for the highly-parallelised data access of modern PCIe SSDs.
A small highlight of the ASRock Fatal1ty X399 Professional Gaming is also to be seen in the I/O panel located to the rear of the motherboard where a USB 3.1 Type-C port is located. The new, thin, and finally reversible USB Type C port Gen 2 reaches maximum speeds of 10 Gbit/s per port. Two LAN ports, a USB 3.1 Type A port as well as eight USB 2.0 ports round out the range of connectivity options for peripherals.
Some of the special refinements offered by the ASRock Fatal1ty X399 Professional Gaming also include RGB-LED lighting and RGB-LED headers as well as a WiFi module and a 10 G Gigabit LAN port. Further internal connectors include two USB 3.0 and USB 2.0 connectors respectively for a total of 4 ports, as well as five 4-pin headers for CPU and case fans as well as water pumps, additional power connectors for stable overclocking, and last but not least a variety of internal status/debug LEDs, headers and switches.
Note: Due to the size of the Ryzen Threadripper, Socket TR4 differs from previous sockets. Please follow the CPU mounting instructions of the motherboard when installing the CPU. This is an LGA socket. The pins are located on the socket, not on the CPU.
- Format: ATX (305 x 244 mm)
- Chipset: AMD X399
Socket: TR4 (for Ryzen Threadripper)
8x DDR4 (2.666 MHz, up to 3.600 MHz with OC)
max. 128 GB
2x PCIe 3.0 x16
2x PCIe 3.0 x16 (electrical x8)
Multi-GPU configurations: 4-way CrossFireX (16/8/16/8), 4-way SLI (16/8/16/8)
1x PCIe 2.0 x1
1x M.2 Key E (used by WLAN/BT module)
- Internal Connectors:
8x SATA 6G (RAID 0, 1, 10)
2x M.2 (M-Key, PCIe 3.0 x4 with max. 32 Gbit/s, horizontal, sizes 2242 to 2280)
1x M.2 (M-Key, PCIe 3.0 x4 with max. 32 Gbit/s, horizontal, sizes 2230 to 2280)
1x U.2 (PCIe 3.0 x4 with max. 32 Gbit/s)
2x USB 3.0 Headers (4 Ports)
2x USB 2.0 Headers (4 Ports)
1x Serial Port (COM header)
1x TPM Header
1x Power LED & Speaker Header
2x RGB LED Header 1x CPU Fan Connector (4-pin)
2x Chassis Fan Connectors (4-Pin)
1x CPU Optional/Water Pump Fan Connector (4-pin)
1x Chassis Optional/Water Pump Fan Connector (4-pin)
1x Clear CMOS Switch
1x Dr. Debug + LED
1x Power Switch + LED
1x Reset Switch + LED
1x CPU Xtreme OC Switch
- External Connectors:
2x USB 3.1 (1× Type A and Type C)
8x USB 3.0
1x 10 Gigabit LAN (Aquantia AQC107)
2x Gigabit LAN (Intel I211AT)
5x Audio (7.1 ALC1220)
1x BIOS Flashback Switch
2x WiFi Antenna (in bundle)
1x PS/2 Combi-Port (Keyboard / Mouse)
- Power Supply:
1x 24-Pin ATX12V (for motherboard)
1x 8-Pin ATX12V (for motherboard)
1x 4-Pin ATX12V (for motherboard)
1x 6-Pin ATX12V (for graphics card)
- Special Features: integrated LED lighting
Further links for "Fatal1ty X399 Professional Gaming, AMD X399 Mainboard - Sockel TR4"
|Motherboard form factor||ATX|
|Motherboard Chipset||AMD X399|
|max. Memory||128 GB|
|PCIe (3.0) x16 (mechanical)||4x|
|PCIe (2.0) x1||1x|
|Fan connectors (4-Pin PWM)||5x|
|Pump connector (4 pin)||2x|
|LED Anschlüsse||ja, RGB (4-Pin 5050 12VGRB) 2x|
|SATA 6G internal||8x|
|M.2 (PCIe 3.0 x4 / SATA 6G)||3x|
|USB 3.1 external (Type C)||1x|
|USB 3.1 external (Type A)||1x|
|USB 3.0 external||8x|
|USB 3.0 internal||4x|
|RJ-45 (LAN) Ports||1x (in total)|
|Illumination colour||RGB (selectable)|
ASRock's Fatal1ty X399 Professional Gaming comes loaded with a 10G NIC, excellent quality, and solid performance, perfectly complementing AMD's Threadripper CPUs in any build.read more...