Product information - Winbot Design-Gehäuse - weiß-blauStrictly speaking the Winbot from InWin is a Full Tower case, in practice however it is anything but. InWin has come up with something very special: The housing is a transparent ball made of high-quality acrylic glass. Available in three colour variations, this futuristic looking case accommodates a lot of conventional hardware on a E-ATX motherboard. There is even room for a 360 mm radiator for watercooling. But what is the unique feature of the strictly limited edition Winbot? It interacts with its owner via gesture control, opening and rotating on demand and even capable of taking selfies.
The Winbot from InWin at a Glance
- Full Tower in futuristic spherical form
- Transparent acrylic glass allows a 360° view into the interior
- Space for motherboards up to E-ATX
- Maximum GPU length of 340 mm
- Supports radiators up to 360 mm
- Integrated stereo camera with face detection
- Rotation and case opening via gesture control
- Limited edition with unique serial number
Big Winbot is Watching YouOne modder described his initial impressions of the Winbot as being reminiscent of Pacman at first glance, another wanted to take the Winbot and turn it into a Death Star. The spherical shape of the transparent Winbot is truly an eye-catcher that makes imaginations run wild. The futuristic looking acrylic glass ball can be opened upwards, but this does not have to be done manually. For both the pneumatic hinge of the cover as well as the foot and turntable are motorised and can be moved by buttons or even by gesture control. There are corresponding switches located on the back in addition to a stereo camera located on the front.
In order for the mechanics and the camera to work at all, a small included power supply must be connected first. Only then can the 70 cm high, 64,8 cm wide and 68,5 cm deep case be opened with a switch to allow almost any hardware to be installed.
The Winbot Supports a Range of HardwareIn the middle is the central support with a robust aluminium motherboard tray that supports motherboards up to E-ATX. The motherboard tray can be removed for easier installation. There is also space for up to eight PCIe expansion cards inside the case. Graphics cards can be up to 34 cm long and ATX power supplies up to 21 cm long. There are also slots for a total of four 3,5"- or eight 2,5" drives.
Three 120 mm fans can also be installed. In provides a bracket for this purpose. Alternatively a 360 mm radiator can be installed. At the back there is space for two additional 120 mm fans, but they may not be more than 50 mm deep. For this reason there is insufficient space for a radiator. 17 cm of space remains for CPU fans.
On the underside of the sphere there is an I/O panel at the bottom, next to the new USB-3.1 Type-C connector, thereby eliminating the need for twisting the USB cable one way and the other to get it to fit correctly, two USB 3.0 ports and the obligatory audio jacks. The base contains an LED strip on the right and left sides. In this version, the base, foot and the strips of both halves of the sphere are black. On the left and right, two red stripes adorn the futuristic looking sphere as well as the outer edge of the base.
- Dimensions: 700 x 685 x 648 mm (W x B x D)
- Material: Acrylic glass, Aluminium
- Weight: 22,46 kg
- Colour: Transparent, Black, Red (stripes)
- Form Factor: E-ATX, ATX, Micro-ATX
3x 120 mm (side)
2x 120 mm (rear)
- Drives: 4x 3,5" or 8x 2,5"
- Power Supply: Standard ATX
- Expansion Slots: 8
- I/O Panel:
1x USB 3.1 Type C
2x USB 3.0 Type A
1x Audio In/Out
- Maximum GPU Length: 320 mm
- Maximum CPU Fan Height: 170 mm
- Maximum PSU Length: 210 mm
- Manufacturer's Guarantee: 2 Years
Further links for "Winbot Design-Gehäuse - weiß-blau"
|Form factor||E-ATX, ATX, Micro-ATX|
|Colour||black, transparent, white|
|Primary colour||transparent, white|
|Width||600 - 700 mm|
|Height||600 - 700 mm|
|Depth||600 - 700 mm, 700 - 800 mm|
|Weight||22 to 24 kg (48.5 to 52.9 lbs)|
|Material||acryl glass, aluminium|
|max. CPU Kühler Höhe (exakt)||170 mm|
|max. Grafikkarten Länge (exakt)||320 mm|
|max. Netzteil Länge (exakt)||210 mm|
|max. CPU Kühler Höhe||160 - 179 mm|
|max. Grafikkarten Länge||300 - 399 mm|
|max. Netzteil Länge||200 - 249 mm|
|Side panel||with window|
|USB 3.1 (Typ C)||1x|
|Case cable management||no|
|PSU position||Hinten Unten|
|120 mm Fans||Hard Plastic|
|Radiator Mounting||1x Triple (360mm)|
|Illumination colour||RGB (selectable)|