Kolink
Observatory RGB Midi-Tower, Tempered Glass - schwarz Window
- Stylish Midi-Tower for motherboards up to E-ATX
- Tempered glass side window
- Glass front
- 4x 120mm RGB fans pre-installed
- Radiators up to 280 mm
- 2x 3,5 & 4x 2,5" slots
- Removable dust filters
in stock
Item number: GEKL-035
EAN: 5999094002494
MPN: OBSERVATORY RGB
Manufacturer: Kolink
Product information - Observatory RGB Midi-Tower, Tempered Glass - schwarz Window
Kolink is pleased to introduce the incredibly stylish Observatory Midi-Tower with its fantastic tempered glass side panel and transparent front. The inclusion of a total of four pre-installed RGB-LED fans allows the case to unlock its full cooling potential. The lighting can also be controlled via the included controller and remote control. The Observatory's spacious interior offers capacity for a wide range of hardware and components. Some of the highlights of this case include pre-installed dust filters, extensive space for watercooling as well as practical cable management options. These are just some of the strong points of this case, and all that in spite of the extremely competitive price point.The Features of the Kolink Observatory at a Glance
- Case designed for motherboards up to E-ATX
- 4 mm tempered glass side panel and front
- 4x 120 mm RGB fans include controller and remote
- I/O panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out
- Support for two 280 mm radiators
- 2x 3,5" or 2x 2,5" drive slots
- Graphics cards up to 38 cm long & CPU coolers up to 16 cm in height
Tempered Glass Side Panel and Front & Four Pre-Installed RGB Fans
The robust chassis consists of one millimetre strong SECC steel and is equipped with a four millimetre thick tempered glass side panel and front. The interior interior has a black coating and is also kitted out with a shroud for the power supply to ensure an incredible clean look. There is also a hard drive cage with brackets for two 3,5" drives. Two 2,5" drives can be mounted behind the motherboard.The visual highlights of the case include three 120 mm fans pre-installed in the front and an additional fan in the back. The fans come with 16 individually addressable RGB-LEDs. Their lighting can be controlled by the bundled RGB controller and fan hub which can be placed in a location of your choosing as well as the infrared remote control. This allows you to choose from over 300 dynamic lighting effects! Two further 140 or 120 mm fans can be mounted in the top. These can be swapped for appropriate radiators. The three 120 mm fans in the front can be exchanged for two 140 mm fans.
Dust Filters Keep the Kolink Observatory Clean
The motherboard tray and the power supply shroud offer numerous cable openings. A 240 mm or 280 mm radiator can be installed in the front and at the top of the Observatory case. The case's air vents come equipped with fine dust filters that are located in the top and underside of the case. These can be removed without the need for tools and even come complete with a smart honeycomb design.Graphics cards up to 38 cm long and CPU coolers up to 16 cm high are compatible. Furthermore the I/O panel located on the front also comes with two further USB 2.0 connectors as well as a USB 3.0 Type A port. There is also a slot for a USB type C connection, but this is not included in the case and must be retrofitted separately. The same applies to a switch for controlling the RGB lighting on the I/O panel.
Technical Details:
- Dimensions: 201 x 435 x 435 mm (W x H x D)
- Material: Steel, tempered glass, acrylic
- Approx: approx. 6,8 kg
- Colour: Black
- Form Factor: E-ATX (up to 279 mm wide), ATX, Micro-ATX, Mini-ITX
- Total Possible Fans:
3x 120 mm / 2x 140 mm (Front)
2x 120 mm / 2x 140 mm (Top)
1x 120 mm (Rear) - Pre-Installed Fans:
3x 120 mm RGB (Front)
1x 120 mm RGB (Rear) - Radiator Mountings:
1x 240 mm / 280 mm (Front)
1x 240 mm / 280 mm (Top) - Filter: Top, underneath
- Drive Bays:
2x 2,5" (internal)
2x 3,5" (internal) - Power Supply: 1x Standard ATX up to 200 mm (optional)
- Expansion Slots: 7
- I/O Panel:
2x USB 2.0 (internal connection)
1x USB 3.0 (internal connection)
1x Audio In/Out - Maximum GPU Length: 380 mm
- Maximum CPU Cooler Height: 160 mm
Further links for "Observatory RGB Midi-Tower, Tempered Glass - schwarz Window"

Videos



Technical Details
Case type | Midi-Tower |
Form factor | E-ATX, ATX, Micro-ATX, White |
Colour | black, transparent |
Primary colour | black |
Secondary colour | transparent |
Width (exact) | 210 |
Height (exact) | 453 |
Depth (exact) | 435 |
Width | 200 - 300 mm |
Height | 400 - 500 mm |
Depth | 400 - 500 mm |
Weight (exact) | 6,8 |
Weight | 6 to 8 kg (13.2 to 17.6 lbs) |
Material | steel, Tempered Glass / Hartglas |
max. CPU Kühler Höhe (exakt) | 160 mm |
max. Grafikkarten Länge (exakt) | 380 mm |
max. Netzteil Länge (exakt) | 200 mm |
max. CPU Kühler Höhe | 160 - 179 mm |
max. Grafikkarten Länge | 300 - 399 mm |
max. Netzteil Länge | 200 - 249 mm |
Side panel | with window |
Front Door | Green |
Position I/O | Deckel |
USB 2.0 | 3x |
USB 3.0 | 1x |
Audio Out | |
Audio In | |
Cardreader | nein |
Fan controller | no |
LCD/TFT Display | nein |
internal 2,5" | 2x |
internal 3,5" | 2x |
Hot-Swap | nein |
PCI Slots | 7x |
HDD Isolation | No |
Motherboard tray | no |
Case cable management | yes |
PSU formfactor | ATX |
PSU position | Hinten Unten |
Preinstalled fans | 4x 120mm |
120 mm Fans | 6 |
140 mm Fans | 4 |
Fan colour | black, transparent |
Radiator Mounting | 2x Dual (240mm), 2x Dual (280mm) |
Filter | yes |
Dampening | no |
Illumination | yes |
Illumination colour | RGB (selectable) |
Remote control | nein |
Schlauchdurchführung | nein |
Transport System | nein |
Awards
-
HardwaremAx - KOLINK OBSERVATORY
Was bleibt ist vor allem eine verdammt coole Optik, die das Herz eines jeden RGB-Fans höher schlagen lässt, ohne es bei der sonstigen Formgebung zu übertreiben. Soviel Farbe bekommt man für so wenig Geld sonst nirgends.
read more... -
Mod-your-case - Kolink - Observatory RGB
Pro
read more...
+ Design
+ Anzahl der vorinstallierten RGB-Lüfter
+ Niedriger Verkaufspreis
+ Gute Kühleigenschaften -
Mod-your-case - Kolink - Observatory RGB
Pro
read more...
+ Design
+ Anzahl der vorinstallierten RGB-Lüfter
+ Niedriger Verkaufspreis
+ Gute Kühleigenschaften -
Basic Tutorials - Kolink Observatory im Test: Showcase-Gehäuse fast für lau?
Man muss Kolink aber zu Gute halten, dass man für rund 70 € ein Gehäuse mit einer Front und einem Seitenteil aus Glas bekommt. Ebenso sind vier RGB-Lüfter vorinstalliert, die sich über einen mitgelieferten Controller und eine Fernbedienung steuern lassen. Für das Geld definitiv ein Kaufgrund, wenn man von den anderen Mängeln absehen kann.
read more... -
Cowcotland - Kolink Observatory case
+ Design
read more...
+ 4 fans
+ Basic silence
+ RGB
+ Chassis that does the work
+ Heat-tempered glass
+ Price
Similar products
in stock
129.90€*
in stock
129.90€*
in stock
199.90€*
from 17.01.20
99.90€*
in stock
49.90€*
This article is featured in:
individually
329.90€*
individually
449.90€*
individually
399.90€*
individually
899.90€*
individually
279.90€*
Customer review "Kolink Observatory RGB Midi-Tower, Tempered Glass - schwarz Window"
schönes Gehäuse
Kann aber keine Volle Sterne geben .
Keine Anleitung weder für den RGB Controler noch für das Gehäuse an sich .
Lüfter sehr schön viele Farben und Effekte , nur sehr laut da keine Lüfter Reglung möglich kein PWM Anschluss deshalb drehen die Lüfter immer auf 100 % .
Hammer!
Top Gehäuse für ein Super Preis!
Pros
-Schöne Optik
-Platz für Kabelmanagement
-4 schöne RGB Lüfter mit schönen Mods
- Guter Airflow + wenns mal kritisch sein sollte kann man das Frontglas schnell entfernen dann gehen locker noch mal je nach dem +- 10Grad runter.
Kontra
-Keine Lüftersteuerung, Lüfter laufen immer auf 100%
( Juckt nicht da eh Headset meist in Benutzung ist)
Würde das Gehäuse auf jeden Fall Empfehlen!
Caseking ist TOP
Moin,
ich habe mir dieses Gehäuse und ein paar weitere Teile am 08.10.2018 bestellt. Zu dieser Zeit war das Gehäuse bei Caseking noch in bestellung und sollte eigentlich erst nach dem 19.10.2018 an mich ausgeliefert werden. Nach einem Tag bekam ich eine Mail mit einer Sendungsnummer? Jo, das Paket war am 10.10.2018 bei mir.
Kein Plan wie Caseking das alles so mega schnell über die Bühne kriegt aber Respekt!
Vielen Dank Caseking bis zum nächsten mal. :)
Ein echt tolles Gehäuse
Ich habe mir das Gehäuse vor kurzem geholt und bin echt positive überrascht. Man bekommt das Case und die 4 vor installierten Lüfter mit Fernbedienung und einer "Console" wo man die Lüfter anschließen kann. Die Lüfter kühlen recht Gut und die Lautstärke hält sich auch in grenzen. Für die Lüfter RGB Beleuchtung sind so viele Farbeffekte möglich die mich echt Überraschen, so viele hatte ich bis jetzt in keinem meiner Lüfter, platz ist in dem Gehäuse für mich auch genug solange man nicht ein ultra Setup da ein Bauen will, weil dafür dürfte der platzt recht eng werden. Zum Schluss sind da noch die Glass Platten ist an sich eine Nette idee, gefällt mir auch recht gut, also zum wirklichem Schluss gefällt mir das Case sehr gut und Kühl kraft ist "für mich" mehr als ausreichend also ein echt Super tolles Case. :D
Gehäuse Tipp
Klasse Produkt nur eine Anleitung wäre hilfreich deswegen keine 10 Sterne.
Achtet drauf das ihr die Lüfter in dern Kontroller nicht irgendwie anschließt, sondern in Reihe also von 1-4 und nicht 1 4 6 5 sonst leuchtet keins oder nur eins XD
Observatory RGB Midi-Tower, Tempered Glass - schwarz Window
Einfach ein tolles Case man muss halt bedenken wenn man sich 4 RGB Lüfter mit Fernbedinung bestellt was man dafür zahlt ich empfehle es !!
Genial
Dank dem Molexkabel funktioniert die beleuchtung auch auf uralten mainboards, reichlich platz für cablemanagement und schlaufen für die mitgelieferten kabelbinder.
Nur die pci-e cover müssen herausgebrochen werden.
Dieses Gehäuse bietet mit seinem zubehör ein nahezu unschlagbares preis/leistungs verhältnis
Preisleistung Ok
Moin Moin,
hier ein kleines Review von mir mit Custom Wasserkühlung:
Vorab muss ich sagen das die allgemeine Verarbeitungsqualität für diesen Preis einfach überrangend ist!
Kann mit Corsair ohne Probleme mithalten (Nicht die Lüfter nur das Case)
Also zu meinen Erfahrungen :)
Ich habe mich für dieses Case entschieden weil ich eine Custom Wakü einbauen wollte und gelesen habe das ohne Probleme 2x 240er Radi möglich ist!
NICHT GANZ....
Also vorne ist es natürlich OHNE PROBLEME (mit etwas anpassung und den passenden Radi vll. sogar 360er) möglich ABER im Deckel hat der Radiator zwar Platz aber es passen keine Lüfter mehr drauf :(
Habe einen normal flachen Radiator und wollte NB eLoops oder BQ Pure Wings 2 drauf bauen.
Leider war nur 1 Lüfter möglich weil der zweite am Arbeitsspeicher nicht vorbei kommt :(
MB Asus ROG Strix 370-E mit 2x 8GB Gskill Trident Z RGB.
Zu den Lüfter kann man nur sagen das sie für den Preis FAST aus meiner Bewertung raus fallen bei dem Preis.
ABER leider ist einer kaputt, denn der Stecker scheint nicht so gut verarbeitet zu sein und passt nicht in den RGB HUB :(
Lautstärke der Lüfter ist OK aber nicht für Quietfans :)
Unbeatable value
Just as the title says. A case can't get any better for the price. And don't be fooled, this case easily competes with higher priced glass cases both in features and quality.
Both windows are actual, slightly tinted, tempered glass. They are held in place with thumb screws and rubber grommets for easy removal and installation.
Plenty of room for cable routing and storage in the back. Spots to attach zip ties.
Four fans with addressable LEDs and a wireless remote to control the lighting. There are plenty of modes to choose from with various lighting speeds. Fan speed is fixed though, and they are not the quietest ones. Nothing unbearable. Also the lighting modes aren't very smooth at the lowest speed setting.
A small drawback is that there aren't dedicated 2,5" slots for SSDs, only two slots for 3,5" drives. They do have a convenient attachment system.
Pci-e covers in the back should be removed prior installing the motherboard. To remove them, you have to bend them inwards and they can scratch the motherboard really easily, keep that in mind!
All in all, the case feels sturdy and has pretty much all the features you'd find in (much) more expensive cases. Even though I was pretty confident ordering this without seeing any proper reviews, I was still positively surprised. I am super happy in my choice!
Schickes Gehäuse
ich bin zufrieden mit dem Gehäuse und die Lüfter mit ihrer Beleuchtung ist der hammer sind echt viele Funktionen an Leucht Effekten
ich kann es nur empfehlen
Einfach nur GEIL!
Habe das Gehäuse gesehen und bin hin und weg, habe es mir gleich vorbestellt anfang März! Ich hatte ein Gehäuse von einen Namen haften Hersteller im Auge das einfach das doppelte kostet und gleich aussieht!
Ich bin absolut begeistert Kabelmangment RBG fans die wirklich leise sind! Tempert Glass.
Die einzigsten beiden Punkte die ich bemängeln könnte sind das das Glas etwas zu stark getönt ist und eine Fehlende Abdeckung der Schalter Einheit im inneren aber das wäre meckern auf höchsten Niveau Top verarbeitet alles da klare Kaufempfehlung!!!!
PS: Schade das man hier kein Bilder anhängen kann
Gehäuse Bestellung
Sehr schnelle Lieferung.
Früher gekommen als auf der Seite lieferbar stand.
Rund um sehr zufrieden, das gehäuse sieht hammer Gail aus funktioniert 1a.