The
Lian Li Q58W3 is a versatile case for high-performance Mini-ITX systems. Despite its compact design, it can accommodate SFX, SFX-L and large ATX power supplies. This is possible due to a removable motherboard tray. The outer appearance can also be customised thanks to the modular tempered glass and aluminium mesh side panels.
The Features of the Lian Li Q58W3 Mini-ITX Case at a Glance:
- Compact aluminium and steel Mini-ITX case
- Modular design for customisation and versatility
- Compatible with ATX and SFX/SFX-L power supplies
- Interchangeable mesh and transparent tempered glass side panels
- I/O panel includes both USB-C and USB 3.0 ports
- Three PCI slots for graphics cards up to 320 mm in length
- Two slots for radiators up to 120 and 280 mm
- Includes PCIe 3.0 riser cable and RGB/fan hub
Q58W3: Elegant Design with Modular Side Panels
The
Q58W3 is a versatile case in a compact Mini-ITX form factor. The side panels are also available in two versions: Tempered Glass and Mesh. With the transparent tempered glass panel allowing an unobstructed view of any hardware installed, and the mesh providing plenty of fresh air for your hardware.
All side panels are fully modular and can be swapped out. This provides a wide range of options for designing and customising the
Lian Li Q58X3. Aclever hinge design enables the side panels to be easily opened, while preventing damage to the side panels and case.
Two modes for great hardware compatibility
Two motherboard trays are included with the
Lian Li Q58X3 to allow for mounting of different power supply form factors. These modules also allow for adjusting the types of fans, radiators, and drives compatible with the case.
SFX/SFX-L mode
This MB tray allows for compact SFX and SFX-L power supplies to be mounted. There is room for a radiator of up to 280 mm at the top, and a total of up to four 2.5” drives can be installed.
- Power supply: SFX/SFX-L
- Fans (top): 2x 120/140 mm
- Radiators (top): 1x 240/280 mm
- Drives: 4x 2.5” or 3x 2.5” + 1x 3.5”
ATX mode
Large ATX power supply units can be mounted to this MB tray. Despite the amount of space this type of PSU takes up, there is still room to accommodate a 120 mm radiator at the top of the case. Two slots are available for 2.5” drives.
- Power supply: ATX
- Fan (top): 1x 120/140 mm
- Radiators (top): 1x 120 mm
- Drives: 2x 2.5”
Place for a Powerful Gaming System
Whether using an SFX or ATX power supply, the
Lian Li Q58W3 has space for powerful hardware. In either configuration, this Mini-ITX case is suitable for
up to 67 mm high CPU coolers and
triple-slot graphics cards with up to 320 mm length. A
PCIe 3.0 riser cable is included with the
Q58W3. There is space for a 120 mm fan or radiator at the bottom of the case. Two magnetic dust filters also keep the case clean.
RGB/Fan Hub, Clever Features and Optional Accessories
The
Lian Li Q58W3 offers a pre-installed RGB and fan hub. It is located on the rear panel of the case and can be flipped open for easy cable installation. With three ports for PWM fans and three ports for addressable RGB elements, the hub greatly improves internal cable management.
Hidden behind the front and top panels, is a
hot-swap tray for 2.5” drives. Thanks to the tool-free design, SSDs and HDDs can be swapped easily. The connections and controls of the I/O panel are accessible on the front of the
Lian Li Q58W3.
With optionally available side panels, the cooling and the appearance of the case can be further adapted to the needs of your hardware. The RGB strips, which are also optionally available, allow for impressive lighting and additional customisation options.
Technical details:
- Dimensions: 170 x 250 x 342 mm (W x H x D)
- Material: Aluminium, Steel, Tempered Glass
- Colour: White
- Form factor: Mini-ITX
- Total fans possible:
SFX mode:
2x 120 / 140 mm (top)
1x 120 mm (bottom)
ATX mode:
1x 120 / 140 mm (top)
1x 120 mm (bottom)
- Fans pre-installed: none
- Radiator mountings:
SFX mode:
1x 240 / 280 mm (top, max. 315 / 320 mm length (with / without hot-swap tray in front))
1x 120 mm (bottom)
ATX Mode:
1x 120 mm (top)
1x 120 mm (bottom)
- Filters: 2x bottom (magnetic)
- Drive Slots:
SFX Mode:
4x 2.5" or 3x 2.5" + 1x 3.5"
ATX mode:
2x 2.5"
- PSU: 1x SFX / SFX-L / ATX (optional, max. 160 mm in length)
- Expansion slots: 3
- Riser Cable: PCIe 3.0
- I/O Panel:
1x USB 3.1 Type C (internal connection)
1x USB 3.0 Type A (internal connection)
1x 3.5 mm jack (4-pole, TRRS)
1x Power button (with power and HDD LED)
- RGB/Fan Hub:
Inputs:
1x 4-pin PWM
1x 3-pin RGB (5VDG, 5V)
Outputs:
3x 4-pin PWM
3x 3-pin RGB (5VDG, 5V)
- Graphics card max. length: 320 mm
- CPU Cooler max. height: 67 mm
- Warranty: 1 year
