Lian Li UNI FAN TL LCD Series Reverse Blade Fan, 3-pack including controller - 120mm, black
- 120 mm PWM intake fan in black with configurable LC display in a 3-pack
- Practical plug system and improved daisy chaining for less cable clutter
- 32 digitally addressable RGB LEDs
- Speed and lighting controllable via Lian Li L-Connect 3 software
- Max. 1,900 RPM speed at 31 dB(A)
- 92.3 m³/h max. airflow and max. 2.83 mmH2O static pressure
- Rubber pads to decouple disturbing vibrations
- Lian Li 12TL fan controller included
Lian Li UNI FAN TL LCD Series Reverse Blade: Intake fan to complement your setup
The Reverse Blade variant of the Lian Li UNI FAN TL LCD Series is an intake fan that fits perfectly into your setup with conventional Lian Li UNI FAN TL LCD Series. The PWM fan relies on the same plug system that frees gaming PCs from unnecessary cable clutter. Lian Li also impresses in terms of cooling performance, delivering stunning RGB lighting and setting new standards.
With the Reverse Blade fans of the Lian Li UNI FAN TL LCD Series, you can create airflow in the reverse direction while still showcasing the stylish side with the hub of the fans. This ensures that you always see the fan's best side, despite the reversed airflow - for a uniform look in your case.
Personalise your fans via LCD
At the hub of the Lian Li UNI FAN TL LCD Series is a 1.6-inch display with a resolution of 400 x 400 pixels, which can be configured almost freely. For example, fan speed, temperature, or CPU and GPU load can be displayed. Alternatively, you can upload your own images, GIFs, or small videos via L-Connect 3 software to give the fans your personal touch. Lian Li points out that the more sensors used, the more the CPU is stressed, and therefore no more than three sensors should be used.
Plug system for seamless fan clusters
The mounting of the Lian Li UNI FAN TL LCD Series follows the clever concept of the other fans from Lian Li: The fans are equipped with contact points and are connected via a practical plug system. Multiple fans can be combined into a cluster and conveniently connected to the controller with just one cable. Thanks to this improved daisy-chain system, you save time, nerves, and prevent unnecessary cable clutter. The pin contacts transmit both power and PWM and ARGB signals.
Revised plug system of the Lian Li UNI FAN TL LCD Series
The plug system introduced with the UNI FAN SL and AL series has been further improved in the Lian Li UNI FAN TL LCD Series. On the one hand, the plug system has been designed so that the connection plug can be removed. This prevents possible collisions with connections on the radiator and simultaneously ensures a tidy look.
Additionally, the connection for the cable module has been removed; instead, the cable can now be connected directly to the fan. The connection is flatly embedded in the frame, thus providing more space for the use of radiators.
The typically separate cables for power and ARGB signals have been combined into a 7-pin cable. You can connect these cables directly to the controller. Up to four fans in a cluster can be powered with one cable. With the corresponding extension cable, you can connect up to 6 fans with LCD to the two ports of the controller and control them via L-Connect 3 software.
Note: The connections of the Lian Li UNI FAN TL LCD Series are not compatible with the SL and AL series!Lian Li UNI FAN TL LCD Series Reverse Blade: Impressive performance values
The intake fans operate relatively quietly at full load with max. 31 dB(A). The small distance of the fan blades to the frame and the resulting reduced friction resistance allows for higher speeds at the same energy consumption, resulting in significantly increased airflow and excellent performance values. Cooler temperatures are also favoured by the increased height of 28 millimetres.
Additionally, the start/stop mode for your Lian Li UNI FAN TL LCD Series can be activated via L-Connect 3 software. If your components are below a temperature you set (maximum 50 degrees), the fans remain off. Furthermore, L-Connect 3 provides the option to create an optimised fan curve for speed and temperature.
Optimised concept for lighting and appearance
Lian Li has significantly improved the fans. The side LED strips of connected fans now have a distance of 0.7 millimetres compared to 3 and 5.6 millimetres in the previous generation, resulting in a significantly reduced distance between individual fans. This creates seamless transitions of the illuminated areas, and fan-cluster-wide effects are enhanced. Lian Li has redesigned the rubber pads and added additional cutouts. The extravagant RGB lighting, which also illuminates the infinity mirror on two sides, is better showcased as a result.
- Dimensions: 124 x 120 x 28 mm (W x H x D)
- Material: Plastic
- Colour: Black
- Bearing: Hydrodynamic bearing
Speed: 0 - 1,600 RPM
Noise: max. 31 dB(A)
Airflow: max. 92.3 m³/h
Static pressure: max. 2.83 mmH2O
Voltage: 12 V
Starting voltage: 5 V
Power consumption: 7.08 W - Lighting:
Type: digitally addressable RGB
Number: 32 LEDs - Display:
Type: IPS
Size: 1.6 inches
Resolution: 400 x 400 pixels
Brightness: 500 cd/m²
Colours: 24-bit sRGB - Connection: 7-pin combined PWM and ARGB
- Controller:
Type: Lian Li 12TL
Connections:
2x 7-pin, for up to 10 TL or 3 TL LCD fans each
Note: The connection cables of the two versions of the fans are different and not compatible with each other!
1x PCIe 6+2 (power supply, for connection to the power supply unit)
1x 9-pin USB (control, for connection to the motherboard)
1x 3-pin ARGB (5VDG, for connection/sync to the motherboard)
1x 4-pin PWM (for connection/sync to the motherboard)
Compatibility: Only Lian Li TL and TL LCD Series fans
|
Colour
|
|
|
Primary Colour
|
Black
|
|
Dimensions
|
|
|
Fan height
|
28 mm
|
|
Fan Specifications
|
|
|
Fan Size
|
120 mm
|
|
Min. Fan RPM
|
0 rpm
|
|
Max. Fan RPM
|
1600 rpm
|
|
Max. Single Fan Airflow
|
92.3 m³/h
|
|
Power Specifications
|
|
|
Starting voltage
|
5 V
|
|
Noise
|
|
|
Max. Single Fan Noise dB(A)
|
31 dB(A)
|
|
Internal Ports
|
|
|
Fan connectors
|
4 Pin (PWM)
|
|
RGB / LED connectors
|
1x Digital RGB (3-Pin 5VDG)
|
|
Lighting
|
|
|
Lighting
|
Yes
|
|
Lighting Colour
|
RGB
|
|
Set
|
|
|
Set
|
Yes
|
|
Number of products in set
|
3
|
Item added to basket!
