PHANTEKS
Digital RGB Controller Hub für adressierbare LEDs
- RGB controller for digitally addressable RGB-LEDs
- Up to 9 components via daisy chain
- Synchronisation with compatible motherboards possible
from 10.01.20
Item number: LULS-292
EAN: 0886523001195
MPN: PH-CTHUB_DRGB_01
Manufacturer: PHANTEKS
Product information - Digital RGB Controller Hub für adressierbare LEDs
The Digital RGB Controller Hub from Phanteks makes for an attractively priced offering to allow you to retrofit your RGB lighting with addressable LEDs or expand your existing lighting to up to nine Phanteks D-RGB products by means of a daisy chain. Additionally, besides the remote control it also comes with a connector for motherboards with digital 3-pin RGB headers and can feed through the motherboard's RGB signal.The Features of the Phanteks Digital RGB Controller Hub at a Glance:
- RGB controller for digitally addressable LEDs
- Mode switch for manual synchronisation or control via motherboard
- Includes remote control and daisy chain functionality
- Compatible with motherboards utilising 3-pin RGB header
- Easy installation with magnets and 3M velcro tape
The Features of the Phanteks Digital RGB Controller Hub in Detail:
With digitally addressable RGB-LEDs you can now create significantly more complex lighting effects, as every LED can be controlled individually and independently. In combination with compatible motherboards and software like ASUS Aura Sync or MSI Light Sync, the lighting of a whole setup can be configured down to the last detail with a few clicks. Mode Switch allows you to switch between manual mode and control via compatible motherboards.Should the controller be operated independently, up to seven Phanteks Digital RGB products can be driven in a daisy chain configuration. If paired with a compatible motherboard, its maximum number of connections can be increased to up to nine RGB components in series.
Technical Details:
- Dimensions (Controller): 65 × 27 × 12 cm (L × W × H)
- Dimensions (Remote): 42 × 20 × 8 cm (L × W × H)
- Colour: Black
- Connections:
Input: 1x 3-Pin RGB (digital)
Output: 7x 3-Pin RGB (digital)
Power Supply: 1x SATA - Bundle:
1x Digital RGB Controller Hub
1x Digital RGB 3-Button Remote
1x Remote Control Cable (1 m)
1x SATA cable (0,2 m)
3x Digital RGB output cable(0,7 m)
1x Digital RGB motherboard adapter cable (0,6 m)
1x 3M Velcro tape (for remote control)
Further links for "Digital RGB Controller Hub für adressierbare LEDs"

Similar products
in stock
29.90€*
in stock
64.90€*
in stock
109.90€*
in stock
39.90€*
in stock
39.90€*
Customer review "PHANTEKS Digital RGB Controller Hub für adressierbare LEDs"
Perfekt für meinen Zweck!
Ich nutze diesen Controller da mein Mainboard keinen 5VRGB Header hat bzw bei MSI Jrainbow1 Anschluss hat. Der Controller kann im manuellen Modus (mit Kabel-Fernbedienung) bis zu 7 digital adressierbare (über daisy chain) Rgb Produkte steuern. In meinem Fall sind das 2 Neon Rgb Strips von Phanteks. Auf der Fernbedienung gibt es 3 Knöpfe, einer für Modus (statisch, breathing, Spektrum fließend, funkeln), einer für die Farbe und einen für die Geschwindigkeit. Sieht toll aus und kann auch gut im Gehäuse versteckt werden. Die Fernbedienung läuft bei mir durch die VGA Lüftungsgitter und findet diskret Platz am Gehäusedeckel. Lediglich die Qualität der Fernbedienung könnte man bemängeln denn diese ist nur ganz locker zusammengesteckt. Befestigt man das beiliegende Velkro hatte ich beim abziehen die obere Hälfte in der Hand. Platine und unterer Teil blieb kleben
Auch mit RGB Fusion Kompatibel
Betreibe daran eine TForce Delta D RGB und 4 Phanteks D RGB Strips. Ansteuerung via Mainboard Header.
Wer weiß wie man Löttet kriegt das Teil auch mit Gigabyte RGB Fusion kompatibel.
Bei mir musste ich nur die 3 Pin Buchse des Input Kabels abzwicken und die Kabel enden Dierekt mit dem Adapter Kabel des Mainboards Verlöten, da die Stecker Formate nicht die gleichen sind.
Jetzt Funktioniert alles Bestens.