Eclipse P500A D-RGB Mid-Tower, Tempered Glass - black
- Black mid-tower with excellent airflow
- Tempered glass side panel
- RGB lighting and controller
- Support for E-ATX motherboards up to 280mm
- 2x 3.5"/2.5" and 3x 2.5"
- Incl. 3x 140mm ARGB fans
- Three vertical expansion slots
Product information - Eclipse P500A D-RGB Mid-Tower, Tempered Glass - blackWith the Eclipse P500A D-RGB, PHANTEKS offers a spacious and versatile mid-tower chassis. This PC enclosure is suitable for high-performance hardware and large radiators. Its tempered glass side panel provides a clear view at the built-in components and the mesh front in combination with various ventilation cutouts ensures an excellent airflow. The pre-installed fans and light strips with digitally addressable RGB lighting illuminate the front and left side of the case.
The PHANTEKS Eclipse P500A D-RGB at a Glance:
- High quality mid-tower for motherboards up to E-ATX
- Allows the installation of a second system with the help of an optional bracket
- Swivel side door made of Tempered Glass for quick access
- Three 140mm RGB fans pre-installed, a total of seven 120mm fans possible
- Addressable RGB lighting including built-in controller
- Suitable for radiators up to 420mm and 190mm tall CPU coolers
- Supports graphics cards up to 435mm and vertical installation
- 2x 3.5/2.5 and 3x 2.5" bays out of the box, up to 10x 3.5/2.5 drives with accessories
- I/O panel with 1x USB 3.1 Type-C and 2x USB 3.0 Type-A
PHANTEKS Eclipse P500A D-RGB: Mid-Tower with Excellent Cooling PropertiesPHANTEKS equips the Eclipse P500A D-RGB with extensive options for placing enclosure fans. In total, up to seven 120mm or six 140mm fans can be mounted to the case: three 120mm or 140mm models to the front, three 120mm or two 140mm fans to the roof, and one 120mm or 140mm to the rear. CPU coolers can be up to 190mm tall. Three 140mm fans with digitally addressable RGB lighting are pre-installed to the front of the chassis.
The PHANTEKS P500A also supports liquid cooling: A 360mm or 420mm triple radiator can be installed to the front, a 360mm triple or 280mm dual radiator to the roof and a 120mm or 140mm single radiator to the rear. The case also provides a cutout for the drain port at the front. Since the chassis corresponds to the Enthoo Evolv X and Eclipse P600S, the Glacier D140 distribution plate (item no.: WAAU-534) can also be mounted to the rear panel.
Plenty of Space for Hard Drives and SSDsThe Eclipse P500A D-RGB also inherited the possibility to accommodate numerous drives. With the included modular drive cages, two 3.5/2.5-inch drives can be installed underneath the PSU shroud. Three more 2.5-inch drives can be mounted to the back of the motherboard tray.
With separately available accessories, two additional 3.5/2.5-inch cages can be placed underneath the PSU shroud and six more can be mounted to the right of the motherboard. The corresponding brackets (GEPH-093) are available from PHANTEKS as accessories. The PHANTEKS Eclipse P500A D-RGB does not support optical drives.
Optional Dual SystemAnother highlight of the PHANTEKS Eclipse P500A D-RGB is the possibility to fit an additional system based on a Mini-ITX motherboard into the case. An optionally available bracket from PHANTEKS is required for this purpose. It is available with a riser cable included (GEPH-099) and without a riser cable (GEPH-092).
The second system can be used, for example, as a dedicated streaming system or as an additional server for virtual machines. To power two systems, PHANTEKS offers the Revolt-X series power supplies (NEPH-001, NEPH-002).
The Design of the PHANTEKS Eclipse P500A D-RGBThe PHANTEKS Eclipse P500A D-RGB boasts an appealing, straightforward design in black with the digitally addressable RGB lighting of the three pre-installed 140mm fans illuminating the case's mesh front. On the left side of the case, the RGB trim at the upper edge of the PSU shroud is visible through the tempered glass side panel.
The I/O panel on the roof of the PHANTEKS Eclipse P500A D-RGB provides one USB 3.1 Type-C port, two USB 3.0 Type-A ports and a power button. It also provides a combined 3.5mm audio jack (TRRS) for headsets, as well as a colour and mode button for the integrated RGB controller.
The RGB controller works autonomously, but it can also be connected to a motherboard using a 3-pin addressable RGB connector to control the lighting via ASUS Aura Sync, MSI Mystic Light Sync, ASRock Polychrome Sync and Gigabyte RGB Fusion.
Three Vertical Expansion Slots for the Graphics CardThe PHANTEKS Eclipse P500A D-RGB provides seven horizontal slots for expansion cards. If there are no HDD brackets and fans installed to the front, up to 435mm long graphics cards are supported. With fans installed, the maximum supported length of graphics cards is 410mm. Three vertical expansion slots allow for a graphics card to be installed vertically.
The corresponding x16 riser cable is not included in the scope of delivery, but is sold separately (GEPH-097, GEPH-098).
- Dimensions: 240 x 510 x 505mm (W x H x D)
- Weight: approx. 8kg
- Material: steel, tempered glass, plastic
- Colour: black
- Form Factor: E-ATX (up to 280mm width), ATX, Micro-ATX, Mini-ITX
- Total Fans Possible:
3x 140/120mm (front)
2x 140 / 3x 120mm (roof)
1x 140/120mm (rear)
- Fans Preinstalled:
3x 140mm PHANTEKS SK140 D-RGB (3-pin header, 500-1.500 rpm, front)
- Radiator-Mountings (partly forfeits HDD and/or fan slots)
1x max. 360/420mm (front)
1x max. 120/140mm (rear)
1x max. 360/280mm (roof)
- Filters: front, roof, PSU (modular)
- Drive Bays:
2x 3.5"/2.5" (internal; vibration-free; + 8x optional with optional HDD brackets)
3x 2.5" (internal)
- PSU: 1x ATX/SFX (optional)
- Expansion Slots: 7 + 3 (vertical)
1x USB 3.1 Type-C
2x USB 3.0 Type-A
1x 3.5mm jack (4-pole/TRRS)
- Internal Connectors:
1x Power SW
1x HDD LED
1x HD Audio
1x USB 3.0
1x USB Type-C
1x 3-pin RGB MB adapter (5V/D/-/G)
1x 3-pin RGB third party extension (5V/D/-/G)
1x 3-pin RGB PHANTEKS expansion (5V/D/G)
1x SATA power
- Max. GPU Length: 410mm (435mm without fans, 294mm using the HDD cage)
- Max. CPU Cooler Height: 190mm
- Max. PSU Length: 250mm (195mm using four HDD cages)
- Max. Size Front Radiator + Fans: 95mm
- Max. Size Roof Radiator + Fans: 65mm
- Included Accessory:
3x 140mm fan with RGB lighting (preinstalled)
2x modular HDD drive bays (stackable)
1x anti-sag bracket
1x vertical GPU mount
1x box with screws
Further links for "Eclipse P500A D-RGB Mid-Tower, Tempered Glass - black"
|Case type||Midi-Tower, Dual-System-Gehäuse|
|Form factor||E-ATX, ATX, Micro-ATX, White|
|Width||200 - 300 mm|
|Height||500 - 600 mm|
|Depth||500 - 600 mm|
|Weight||8 to 10 kg (17.6 to 22 lbs)|
|Material||plastic, steel, Tempered Glass / Hartglas|
|max. CPU Kühler Höhe (exakt)||190 mm|
|max. Grafikkarten Länge (exakt)||294 mm, 410 mm, 435 mm|
|max. Netzteil Länge (exakt)||195 mm, 250 mm|
|max. CPU Kühler Höhe||180 - 200 mm|
|max. Grafikkarten Länge||200 - 299 mm, 400 - 500 mm|
|max. Netzteil Länge||140 - 199 mm, 250 - 300 mm|
|Side panel||with window|
|USB 3.1 (Typ C)||1x|
|Audio Aus- / Eingänge||1x Aus-/Eingang komb. (3,5 mm Klinke, 4-Pol, TRRS)|
|intern 2,5 / 3,5 Zoll||2x|
|PCI-Slots||7, 7 + 3|
|Case cable management||yes|
|PSU position||Hinten Unten|
|Preinstalled fans||3x 140mm|
|120 mm Fans||Aluminium|
|140 mm Fans||6|
|Fan colour||black, Transparent matt / frosted|
|Radiator Mounting||1x Single (140mm), 1x Triple (360mm), 1x Quad (420mm)|
|Illumination colour||RGB (selectable)|
|LED Kompatibilität||ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync|