noblechairs collection 2016

PHANTEKS
Enthoo Evolv Shift X Mini-ITX Gehäuse, Glas - schwarz

  • Premium black Mini-ITX Enthoo Evolv Shift X
  • Aluminium panels & tempered glass
  • Good water-cooling support & 2 pre-installed fans
  • Space for 52 cm long graphics cards & 280 mm radiator

 

in stock

159.90€*
124.90€*
 
 
 

Item number: GEPH-075

EAN: 0886523300960

MPN: PH-ES217XE_BK

Manufacturer: PHANTEKS

 
 

Product information - Enthoo Evolv Shift X Mini-ITX Gehäuse, Glas - schwarz

The Enthoo Evolv Shift X combines the striking design of the Evolv series with new, innovative features to make for a truly eye-catching Mini-ITX case. The Evolv Shift X has a very small footprint, however due to its innovative layout it is capable of hosting a range of high-end gaming hardware components. The Shift X can also be placed horizontally, cutting an attractive figure in any living room with its intelligent blend of aluminium and tempered-glass surfaces. In spite of being designated as a Mini-ITX case, the Enthoo Evolv Shift X is capable of holding a large dual-radiator as well as graphics up to 50 cm in length.

The Features of the Phanteks Enthoo Evolv Shift X Mini-ITX Case

  • Striking aluminium and tempered-glass design
  • Perfect case for stylish living room PCs
  • Space for a 280 mm radiator
  • Graphics cards up to 52,9 cm in length
  • GPU bracket can be rotated
  • Supports a wide range of RGB-LED controllers
  • Can be set vertically or horizontally

Premium PC Case for the Living Room

The Enthoo Evolv Shift X offers space for gaming graphics cards up to 52,9 cm in length and a 280 mm radiator for a high-performance AiO CPU cooler. The case has been designed from the ground up to be the perfect silent, watercooled system for use in the living room. With its blend of tempered glass and aluminium, the case blends in perfectly amidst any designer living area and can be set vertically in a manner similar top Hi-Fi speakers or set horizontally like a games console.

The graphics card is mounted with the accompanying PCIe x16 riser card in such a way as to allow either the backplate or the GPU cooler to be visible from the exterior. The Mini-ITX motherboard is built in parallel to the graphics card with the back panel facing upwards. The ports on the I/O panel as well as the graphics card are hidden beneath a covering which allows all connected cables to be redirected through a gap in the back.

Mini-ITX Case for Custom Watercooling

The 280 mm radiator mentioned above can be installed to the fore of the Enthoo Evolv Shift X underneath the motherboard and the graphics card. An SFX(-L) power supply can be installed in the back and the free space between the PSU and the front can be used for holding the reservoir of a custom watercooling setup. As the RGB lighting is visible from both sides, coloured liquid coolants are ideal for this case.

In order for your hardware of choice to be shown in the best possible light, with the help of the RGB-LEDs, the case enables LED lighting to be controlled via ASUS' Aura Sync, RGB Fusion from Gigabyte, as well as MSI's Mystic Light Sync - and all at the push of a button. A bracket for pumps as well as PSU shrouds also come with this Mini-ITX case.

Cooling, Storage & Additional Features

Two 140 mm fans come pre-installed from the factory in the Evolv Shift X and while the fan in the base of the tower pulls air in, the fans at motherboard height push the warm air up and out of the case. Additionally the warm air produced by the hardware is also removed via the vents built into the roof of the case.

Up to two 3,5" hard drives can be installed in the front in place of a radiator and both accompanying SSD brackets can similarly be attached in the front. The 2,5" SSD brackets are somewhat better installed at the back, allowing the case to hold a further radiator. The base plate on which the SSD brackets are installed (no tools necessary) can be removed to further simplify hardware installation.

The I/O panel of the Mini-ITX case is located to the left side on the rear of the case and offers two USB 3.0 ports for gaming peripherals or external USB hard drives as well as USB sticks. In typical Phanteks fashion there are several points with Velcro ties to allow improved cable management as well as rubberised cable guides in the case. Dust filters as well as air vents in the aluminium casing are equipped with dust filters to offer the system further protection.

Technical Details:
  • Dimensions: 170 x 650 x 274 mm (W x H x D)
  • Material: Steel, aluminium, tempered glass
  • Colour: Black
  • Form Factor: Mini-ITX
  • Total Possible Fans:
    3x 140/120 mm (upper)
    1x 140/120 mm (lower)
  • Pre-installed Fans:
    1× 140 mm (upper)
    1× 140 mm (lower)
  • Radiator Mountings (partially dependent upon HDD and/or fan slots):
    1x max. 280 mm (upper)
    1x max. 120 mm (lower)
  • Filter: Front, back, lower (removable)
  • Drive Trays:
    2x 3,5" (internal, if no radiator is installed)
  • 4x 2,5" (internal, 2 SSD brackets available, additional brackets can be acquired separately)
  • Power Supply: 1x SFX, SFX-L or ATX (max. 160 mm, with limitations)* (optional)
  • Expansion Slots: 2
  • I/O Panel:
    2x USB 3.0
    1x RGB Switch
  • Maximum Graphics Card Length: 529 mm
  • Maximum CPU Cooler Height: 82 mm
  • Guarantee: 5 Years

*Attention: The first batch of Evolv Shift Series cases are incompatible with specific series of power supplies, in particular those whose construction varies from the standard layout. A support strut on the cutout of the PSU bracket can prevent the power supply from being oriented correctly or, in the worst case, installed at all. An SFX/SFX-L/ATX-format PSU is compatible when there is either no on/off switch located on the rear or it is positioned in such a way that it is not located directly next to the connector plug. This notice will be removed as soon as full compatibility with all power supplies can be established in a future revision.

The following power supplies are currently known to be incompatible:
Silverstone SX550
Silverstone ST30F (V1.0)
Silverstone ST45SF (V2.0
All be quiet! SFX PSUs
All Cablematic SFX PSUs
FSP Dagger 600W
Tooq TQEP
Spire SP-SFX-300W-PFC

The following models provide limited compatibility and can only be installed with the fan facing towards the inside of the case:
Silverstone ST45SF (V3.0)
Silverstone ST30SF (V2.0)

 

Further links for "Enthoo Evolv Shift X Mini-ITX Gehäuse, Glas - schwarz"

 
PHANTEKS
 

Videos

 

Video Thumbnail

Technical Details

Case type Mini case
Form factor White
Colour black
Primary colour black
Secondary colour transparent
Width (exact) 170
Height (exact) 650
Depth (exact) 274
Width 100 - 200 mm
Height 600 - 700 mm
Depth 200 - 300 mm
Weight (exact) 9,5
Weight 8 to 10 kg (17.6 to 22 lbs)
Material aluminium, steel, Hartglas
max. CPU Kühler Höhe (exakt) 82 mm
max. Grafikkarten Länge (exakt) 529 mm
max. Netzteil Länge (exakt) 160 mm
max. CPU Kühler Höhe 80 - 119 mm
max. Grafikkarten Länge über 500 mm
max. Netzteil Länge 140 - 199 mm
Side panel with window
Front Door ja
Position I/O Front
USB 2.0 2x
USB 3.0 2x
Cardreader nein
Fan controller no
LCD/TFT Display nein
internal 2,5" 4x
internal 3,5" 2x
Hot-Swap nein
PCI Slots 2x
HDD Isolation ja
Motherboard tray yes
Case cable management yes
PSU formfactor SFX, SFX-L
PSU position Hinten Unten
Preinstalled fans 2x 140mm
120 mm Fans High-Sensitivity Sensor
140 mm Fans 2
Fan colour black
Radiator Mounting 1x Single (120mm), 1x Dual (280mm)
Filter yes
Dampening no
Illumination yes
Illumination colour RGB (selectable)
LED Kompatibilität ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync
Remote control nein
Schlauchdurchführung nein
Serie Enthoo Evolv
Volume in L 30,3
Transport System nein

Customer review "Phanteks Enthoo Evolv Shift X Mini-ITX Gehäuse, Glas - schwarz"

Average customer review
Star Rating
(from 1 customer reviews)
 
Laurent
Vorwort: Ich habe in diesem Gehäuse die Corsair H115i Wasserkühlung verbaut und eine...
Limit to last 6 weeks of reviews (1)
No Limit (1)
100% (1)
0% (0)
0% (0)
0% (0)
0% (0)
100% (1)
0% (0)
0% (0)
0% (0)
0% (0)
 
Laurent

Verarbeitung Top, Optik Top doch...

Vorwort:
Ich habe in diesem Gehäuse die Corsair H115i Wasserkühlung verbaut und eine 1080 GTX mit 2 slots (mehr slots gibts hier nicht)

Pros:
- Schlicht und schick
- Top Verarbeitung: Viel lackiertes Aluminium und das wackelige Oberteil wurde entweder nachgebessert oder wackelt nur bei der kürzeren Version. Da wird auch Plastik verwendet wie ich aus Videos erfahren habe.
- AIO-Wasserkühlungen passen ohne Probleme. Wärmetauscher kann nur an Forderseite montiert werden.

Cons:
- Kabeldurchläufe nicht optimal in meiner Ansicht. Irgendwie krieg ich die Kabel nicht so eingesetzt dass sie nicht unter Spannung in den Sockeln sitzen.
- Das mitaus bedeutenste Defizit vom Gehäuse ist der Luftdurchfluss. Laut Handbuch ist der Luftfluss so geplant worden dass die Luft von unten (1 Lüfter) herein und vorne (max. 3 Lüfter) heraus strömt. Die verbaute Wasserkühlung belegt die 2 einzigen möglichen Lüfterplätze und bläst die Luft über den Wärmetauscher durchs Gehäuse heraus. Unter Volllast kommt meine CPU auf 60°C und die GPU auf 82°C. Einzige Verbesserungsmöglichkeit war der obere Lüfter. Dieser bläst bei mir die Luft nun hinein und auf die GPU. Damit erziele ich 2°C weniger unter Volllast.

Persönnliches Fazit:
Ich würde das Gehäuse nur denjenigen empfehlen die entweder keine High-End GPU verbauen oder die noch Geld übrig haben um eine komplette Wasserkühlung einzubauen (CPU + GPU).

 
 
Write an review
Review will be activated after verification

 

The fields marked with * are required.

Awards

  • Hardware Inside - Phanteks Enthoo Evolv Shift

    Die Qualität der Seitenteile ist enorm hochwertig. Das eigenständige und einzigartige Design des Phanteks Shift ist überzeugend. Für einen kleinen PC ist das Enthoo Evolv Shift in der Höhe aber doch ähnlich der anderen Midi-Gehäuse. Für den normalen Nutzer sind ein ITX-Mainboard und eine ITX-Grafikkarte keine Reduzierung in der möglichen Leistung. Klar werden selten OC-Rekorde im ITX-Format aufgestellt und die Lüfterbestückung oder Wasserkühlungsoptionen sind begrenzt, doch im Gesamtbild ist das Enthoo Evolv Shift sehr stimmig. Am Deckel sind an den Rillen leichte Verarbeitungsspuren zu erkennen und die Kabelwege sind sehr eng beschnitten.

    read more...
  • Think Computers - Phanteks Evolv Shift X Case

    Pros:
    – One of the best case aesthetics you can find
    – Perfect for an HTPC
    – High quality fit and finish
    – Lots of room for watercooling

    read more...
  • KitGuru - Phanteks Evolv Shift X – Glass and Aluminium Mini-ITX tower case

    Pros:

    + Stunning combination of aluminium and glass looks great.
    + Extensive use of dust filters.
    + Cooling works well for such a novel form factor.
    + The price is reasonable for an unusual design.

    KitGuru says: Phanteks Evolv Shift X will appeal to the individual, rather than the mainstream.

    read more...
  • The Mood Zoo - Phanteks Evolv Shift X

    But as I started taking the case apart and working on the build, I started falling in love with it and soon realized that the Shift X is one amazing case that allows for a build as stunning as the case itself. Like a lot of Phanteks cases, the design is very nice and care has been taken to make sure that you have a great build experience. I struggled to find any short comings with the case, and every time I felt like a feature should be present, it was.  The build quality is just phenomenal and the case feels like it is worth its price tag. The Shift X feels like a premium product all the way from it’s packaging to the quality of the hardware used and supplied with the case.

    read more...
  • The Mood Zoo - Phanteks Evolv Shift X

    But as I started taking the case apart and working on the build, I started falling in love with it and soon realized that the Shift X is one amazing case that allows for a build as stunning as the case itself. Like a lot of Phanteks cases, the design is very nice and care has been taken to make sure that you have a great build experience. I struggled to find any short comings with the case, and every time I felt like a feature should be present, it was.  The build quality is just phenomenal and the case feels like it is worth its price tag. The Shift X feels like a premium product all the way from it’s packaging to the quality of the hardware used and supplied with the case.

    read more...
  • TechTesters - Phanteks Evolv Shift X

    All right, enough about the subjective insights of yours truly. We see something objectively unique, we see a clever and well thought-out product, we see an undeniably neatly high-quality product, and above all we see a new, clever and striking opportunity to create a special build for yourself with a compact footprint on your desk or wherever you want to create something beautiful, whether horizontal or vertical. With some planning, attention and love admittedly, but something else would be inappropriate for a housing like this. Seldom do products achieve perfection, but even less frequently we see products that we become so enthusiastic or fill the geek sentiment as this new Phanteks Evolv Shift X.

    read more...
 
 
Stock Indicator

in stock

The item is in stock in our warehouse and ready for immediate dispatch.

in stock today

The item should become available during the course of the day.

from XX.XX

The item will become available for shipping on a certain date.

On Order

We ordered this item but there is no confirmed delivery date yet.

individually

The system or kit will be assembled individually according to customer specification, please check the stock indicator for each component separately.

Unknown

The manufacturer was unable to provide us with any prospective delivery date.
Tauche in das Universum von John Wick ein

Erlebe das neue VR Spiel ab sofort in unserem Showroom.

Be John Wick
Caseking bei Facebook Caseking bei Twitter Caseking bei Instagram Caseking Info Center Caseking Jobs Caseking TV