Ssupd Meshrom S V2 PCIe 5.0 PC Case, Mini-Tower, Mini-ITX Case - White

• Compact Mini-ITX case made of steel
• Supports ATX motherboard installation with vertical GPU orientation
• Generous air inlets and chimney effect for excellent airflow
• Supports a 280mm radiator and up to five fans
• 2x USB 3.0 Type-A / 1x USB 3.1 Type-C
• Room for up to six 2.5-inch drives (horizontal GPU installation)
• Supports GPUs up to 332mm in length and CPU coolers up to 74mm in height (3-slot GPU)
• Includes PCIe 5.0 riser cable

The Meshroom S V2 by SSUPD: You Can’t Get More Mesh Than This

If you had to describe the Meshroom S by SSUPD in one word, it would undoubtedly be: airflow! This SFF case is a thoughtfully engineered product that will thrill gamers and let your gaming hardware breathe freely.

The entire outer surface of the Mini-ITX case is made of breathable mesh, offering excellent ventilation for your gaming PC. Despite its compact size, it can accommodate up to five fans. Water-cooling enthusiasts can also install a radiator up to 280mm in length.

For Demanding Gamers: ATX Motherboard in a Mini-ITX Case

A standout feature of the Meshroom S V2 is its ability to support full-sized ATX motherboards. This allows you to build high-performance gaming systems in an SFF case without being limited to compact ITX boards. The only requirement: the graphics card must be mounted vertically behind the motherboard tray to create enough space for the ATX board. For this purpose, the included PCIe 5.0 riser cable is used.

The Meshroom S V2 can house up to six 2.5-inch drives with a horizontally mounted GPU. If you prefer vertical GPU installation, up to three 2.5-inch drives are supported.

Installing Your Hardware

Graphics cards up to 332mm in length can be installed when using an ITX motherboard. With an ATX motherboard, the maximum GPU length is reduced to 314mm. There are also limitations regarding CPU cooler height: with a 3-slot GPU, the cooler can be up to 74mm high, with a 4-slot GPU, the limit is 54mm. For more detailed compatibility information, please visit the SSUPD website.

Flexible I/O Panel and Modern Connectivity

The removable I/O panel is elegantly integrated into the mesh structure at the front of the top panel. It includes two USB 3.0 Type-A ports and one USB 3.1 Type-C port. The power button is discreetly located on the back of the case.