- 850 Watt PSU with powerful 70.5A single rail
- High efficiency thanks to 80 PLUS Gold certification
- Quiet 120mm fan with switchable semi-passive mode
- Fully modular cable management with round cables
- One 12VHPWR 12+4-pin and four 6+2-Pin PCIe connectors for graphics cards
- Six SATA- and four Molex connectors
The Kolink Regulator 80 PLUS Gold PSU with 12VHPWR connector
The Regulator Series from Kolink represents a new series of high-performance power supplies with 80 PLUS Gold certification. The premium quality components, advance design and powerful 12V single-rail ensure robust and reliable power delivery as well as precise voltage regulation. Following the ATX 3.0 standard, the Regulator 80 PLUS Gold 850W offers a 12VHPWR PCIe 5.0 connector for the 4000 series GPUs from NVIDIA. The premium quality power supply is rounded off by the welcome addition of fully modular cable management as well as a whisper-quiet 120mm fan.
The Kolink Regulator 80 PLUS Gold PSU Rated at 850 Watts in Detail
The advanced design and the use of high-quality components mean that Kolink has been able to produce an efficient and high-performance power supply in the form of the Regulator 80 PLUS Gold 850W. To this end, the manufacturer has opted for LLC transformers and DC-DC technology alongside independent voltage regulation. This combination also provides benefits to the unit's operating efficiency as well as the precision with which voltages are regulated, particularly when it comes to asymmetric loads.
As a result, the Regulator is capable of outputting nearly its entire rated power delivery through the +12 Volt rail if necessary. This can be up to 70.5A and means that all your high-performance components are kept well-supplied with all the power they need. The high operating effectiveness means that it meets the criteria for 80 PLUS Gold certification as well as an average efficiency of 92 percent when used on a European 230 Volt network.
Prefectly Cooled and Well Connected
In terms of cooling, the units use a
slow-spinning 120mm fan with ultra-durable fluid dynamic bearings and a semi-passive mode you can toggle via a switch. Apart from the impressive performance specifications, the
Kolink Regulator 850W isn't short of connectivity options either: in addition to a 20+4-Pin ATX- and two 4+4-Pin 12V CPU connectors, the PSU boasts a 12+4-pin 12VHPWR PCIe 5.0 connector and
four 6+2-Pin PCIe plugs for powering your graphics cards. Additional components are powered by means of six SATA- and four Molex connectors.
Technical Details:
- Dimensions: 150 x 86 x 140 mm (W x H x D)
- Fan: 120mm (semi-passive mode available, FDB fan)
- Colour: Black (PSU, fan)
- Efficiency: min 90/87/87 percent at 50/20/100 percent load on European 230 Volt network. Meets requirements for 80 PLUS Gold.
- Active PFC
- Form factor: ATX 12V
- Standard: 3.0
- Output: 850W
+3,3V: 20A
+5V: 20A
+12V: 850W / 70.5A
-12V: 0.3A
+5Vsb: 3A
- Connectors (removable):
1x 20+4-Pin (600mm)
2x 4+4-Pin ATX12V/EPS12V (650mm)
1x 12+4-pin 12VHPWR PCIe 5.0 (600mm)
4x 6+2-Pin PCIe 1x (600mm + 150mm) / 2x (600mm)
6x SATA (2x 500mm + 150mm + 150mm)
4x 4-Pin Molex (500mm + 150mm + 150mm + 150mm)
- Safety:
OVP/UVP (protection against over- and undervoltage)
SCP (short circuit)
OPP (overload)
OCP (over-current protection)
OTP (over-temperatue protection)
SIP (surge and inrush protection)