A gaming chair combines the comfort and adjustability of an office chair with a stylish design that appeals to gamers and enhances the setup visually. To cater to your taste and individual seating requirements, we at Caseking offer a particularly large selection of gaming chairs from various manufacturers.
Anyone who sits in front of the gaming PC for long periods, whether for gaming or working, needs the right base! But what should you look for when buying a gaming chair? With this guide on gaming chairs, we help you find the right gaming chair.
Our gaming chair guide gives you important tips on ergonomics, design and appearance, as well as the material from which the gaming chair is made. We also provide important advice on maintaining your gaming chair.
In general, you should think about some basic questions before buying a gaming chair and be aware that there are many factors to consider in finding the best gaming chair for you, such as:
When searching for the optimal gaming chair, the manufacturer's information on the dimensions of the corresponding gaming chair can help. Ideally, you can see all relevant information at a glance and check whether the gaming chair suits you - or not.
The specification of the height and depth of the seat is particularly important here, but the width of the backrest is also relevant. If the gaming chair has side wings on the backrest, these should also be considered. For example, the noblechairs EPIC genuine leather gaming chair shown has all the important specifications.
When buying your gaming chair, pay attention to the following 5 aspects:
The chair height should be set so that the thighs and lower legs form a right angle. Sitting on the front edge of the seat and with sharply angled thighs is not stable, and smaller angles with heavily bent knees lead to circulatory problems in the legs.
Your feet should be able to rest completely on the floor. Adjust the table height so that the upper and lower arms form a right angle and your arms rest comfortably on the table or keyboard.
Both the seat and the backrest of the work chair should be ergonomically shaped, and the seat should be fully utilized. It should also support two-thirds of the thighs.
The backrest should support the back in the lower and middle areas, and the lumbar bulge, the curvature of the backrest, should be adjusted to individual body measurements so that the spine is supported in the lumbar region.
Use the backrest and sit upright: To ensure that your muscles and intervertebral discs are evenly loaded, your pelvis should be slightly tilted forward when sitting. This upright sitting position keeps the abdominal area free and without pressure, and the blood circulation in your legs is not hindered. You should avoid sitting hunched over for long periods; short changes in posture are allowed.
Dynamic sitting prevents one-sided loads on the spine and improves the blood circulation of the muscles and intervertebral discs. With dynamic sitting, the sitting position is changed several times, so that you lean forward, straighten up, and lean back. Many gaming chairs support dynamic sitting by moving the backrest with you and providing support simultaneously. Dynamic sitting prevents one-sided loads on the spine and improves blood circulation in the muscles and intervertebral discs.
Arms held freely over the keyboard must be supported by the muscles and strain the shoulder area. To prevent this, the arms should rest comfortably on the armrests or the table. A wrist rest in front of the keyboard also has a relieving function for the shoulder and neck area.
Footrests relieve both the leg muscles and the back and can compensate for the height difference to the floor for shorter people. Ideally, footrests are not necessary as long as the table is height-adjustable.
Design and appearance are particularly subjective criteria when choosing your new gaming chair. Do you place special emphasis on design and appearance, or are factors such as ergonomics and price more important to you? We offer a particularly large selection of different gaming chairs so that you can choose your perfect gaming chair. While some prefer an elegant design with neutral colors (e.g., noblechairs), others may prefer a racing-look design (e.g., Nitro Concepts). Gaming chairs from Razer and ASUS go perfectly with the manufacturers' peripherals and complete your gaming setup. noblechairs, on the other hand, cooperates with licensors like Disney, Marvel, and Bethesda to offer stylish eye-catchers for your gaming room.
Gaming chairs are now offered with a wide range of covers made from different materials. The most common materials include:
Each of these materials offers its own advantages and disadvantages. As with the design, the cover material of the gaming chair is also strongly inspired by the automotive industry. While genuine leather, hybrid synthetic leather, and fabric are very breathable, synthetic leather is particularly easy to care for.
After we have dealt with the ergonomics and design of gaming chairs, we now move on to the materials used for a gaming chair. For this, we will look at the individual components of a gaming chair and explain what material can be used here.
The base forms the foundation of a gaming chair. Aluminum and plastic are often used to manufacture the base. Aluminum bases are generally very robust and more stable than plastic bases. High-quality plastic comes very close to the robustness of aluminum, but there is no labeling requirement for the quality of the materials used. Therefore, no exact information can be given about the quality of a plastic base.
Chair wheels are usually made of plastic. In general, the larger the diameter of the wheels, the smoother they run. And because they are larger, they better compensate for uneven surfaces. There are wheels for carpets and hard floors that differ in hardness. Information about which surface the wheels are suitable for can be found in the respective product description.
The contact surfaces of the armrests are usually made of nylon, polyurethane, or other plastics. Sometimes aluminum is used here, and some gaming chairs offer increased comfort in the form of padding with PU synthetic leather covers on the armrest.
Steel is the most commonly used material for the frame, and aluminum is rarely used. The quality of the steel and the construction of the frame are crucial to evaluating the quality of a gaming chair. Good chairs have cross braces in the backrest and seat and clean weld seams. Since the frame is not visible under the cover and padding, you must rely on reviews and tests from the internet.
Some gaming chairs combine a steel seat with a backrest made of (plywood) panels. What initially sounds like a cost-effective alternative turns out to be a good idea because S-shaped wooden backrests mimic the curvature of the back, making them subjectively comfortable.
The quality of the padding is also not immediately apparent, so you can only feel it. Good padding should cover the entire frame and be neither too hard nor too soft. Only a few manufacturers specify what material is used to pad the gaming chair, and those looking for more detailed information must rely on test results from the internet.
The majority of available gaming chairs are covered with fabric or PU synthetic leather. A few gaming chairs are covered with a mesh cover, while the EPIC series from noblechairs stands out with the use of genuine leather. noblechairs offers gaming chairs with grained genuine leather and particularly smooth Nappa leather. With some chairs, the cover can be removed from the frame for washing.
The build quality of gaming chairs is a crucial factor in evaluating the quality of a gaming chair. When you have chosen a model and received the new chair, it is best to check for defects before assembling and the overall quality of the material. Especially with inexpensive models, you should check if the delivered goods have defects.
Especially with the padding, you should test if it meets your needs. In addition to the consistency of the padding, you should check if the frame presses through the padding. Before assembling, it is also advisable to check the fit of the individual parts. For example, if the drilling is inaccurate, you can test this by holding the seat and backrest together.
Other quality features include clean seams and a well-tensioned cover. These are more optical defects but can be seen in daily use. Other optical defects include cracks or impressions in the padding and scratches on the base. If no defects are found, you can assemble the new gaming chair according to the instructions.
To enjoy your new PC chair for as long as possible, it should be maintained and cared for regularly. This is very simple and only needs to be done at longer intervals but can significantly extend the life of a gaming chair!
Here are some maintenance tips:
It would be best to avoid stains and dirt altogether! Since this is not always possible, here are some tips for cleaning and caring for a gaming chair. Regardless of the cover, stains and dirt should be removed as soon as possible. Additionally, direct sunlight should be avoided as it makes the colors of the cover fade faster.
Covers made of genuine leather look particularly classy, and real leather lasts longer - however, this depends on regular care. Dirt can usually be removed with a damp cloth, and the use of cleaning agents should be avoided. If a cleaner is needed, special leather cleaners should be used. To care for the genuine leather cover, a special fat-based leather balm should be used. This prevents the leather from drying out and becoming brittle.
For PU synthetic leather covers, proceed as with genuine leather and clean dirt first with a cloth. For stubborn stains, colorless dishwashing liquid in very small amounts can be used. Then the leather imitation should be treated with a special balm for synthetic leather. Since there are many variations of PU synthetic leather, the care instructions of the manufacturer should be followed.
Stains remain more easily trapped in the microfibers of a fabric cover than in other covers and are difficult to wash out. Special cleaning agents like foam cleaner or upholstery cleaner can be used for cleaning. Before using cleaning agents, the gaming chair should be vacuumed to remove dust and larger crumbs. Generally, the care instructions and manufacturer specifications should be considered.
