Thermal Grizzly Putty Basic Thermal Paste - 100g
Thermal Grizzly introduces the Thermal Putties, a new product line specifically developed for the modding of graphics cards and replacing thermal pads between PCBs and heatsinks. However, the Thermal Putties can also be used by DIYers and experienced tinkerers for a wide range of devices such as notebooks, handhelds, and gaming consoles.
- Flexible replacement for thermal pads with a wide range of applications
- Especially suitable for heatsinks with varying distances to critical components
- Basic version with medium thermal conductivity for efficient components
- Safe to use thanks to its electrically insulating properties
The flexible alternative to thermal pads: Thermal Grizzly Putty Basic
The Thermal Grizzly Putty is an electrically non-conductive alternative to conventional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences and is therefore ideal as a replacement for thermal pads on graphics cards and other devices.
Out of the factory, multiple types of thermal pads in different thicknesses are typically used, which means that when replacing the pads or converting the cooler to a GPU water block, several different pads are usually required. This issue is solved by the flexible applicability of Thermal Grizzly Putty.
How much Thermal Grizzly Putty do I need?
For modding a single, smaller graphics card without a backplate (e.g. GeForce GTX 1060), around one 30-gram tin of Thermal Grizzly Putty is needed. For a larger graphics card such as a GeForce RTX 4090, one 30-gram tin is generally sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side.
On the back side, between the PCB and the backplate of larger graphics cards, there is often a consistent and wider gap between the surfaces. To fully fill this space, around two 30-gram tins or one 100-gram tin are typically required.
Three variants for different use cases
With three different variants, the manufacturer offers the right product for every performance class. The Basic version is suitable for efficient components that generate low heat. The Advance version, on the other hand, is aimed at the mid-range segment with more powerful components due to its higher thermal conductivity. For the high-end segment, Thermal Grizzly offers the Putty Pro, which ensures optimal cooling of your high-end components thanks to its particularly high thermal conductivity.
Flexible and safe application
Before applying, the target surface should be thoroughly cleaned and degreased, for example using Thermal Grizzly cleaning wipes or standard isopropanol. Thanks to its electrically insulating properties, it can be spread over large areas using the included spatula. Alternatively, the thermal putty can be shaped by hand into small balls that can be adjusted in size to match the application area (e.g. VRAM, SMD).
|
Contents
|
|
|
Weight (Contents)
|
100 g
|
| Manufacturer Information | Thermal Grizzly Holding GmbH Gewerbestraße 39, 16540 Hohen Neuendorf, Deutschland |
| Responsible Person | Thermal Grizzly Holding GmbH Gewerbestraße 39, 16540 Hohen Neuendorf, Deutschland |
Related categories
Item added to basket!
