Jonsbo TK-2 2.0 Mid Tower, Tempered Glass - Black

• Modern midi tower in white from Jonsbo
• U-shaped tempered glass on the side and front
• Space for Mini-ITX, Micro-ATX, and ATX motherboards
• Cooling via chimney effect, up to 9x 120 mm fans possible
• Two 360 mm radiators possible on the top and bottom
• Room for graphics cards up to 405 mm
• For two 3.5-inch or 1x 2.5-inch and 1x 3.5-inch storage devices

The Jonsbo TK-2 2.0 Midi Tower: Elegant and Modern

Externally, the TK-2 2.0 ATX case from Jonsbo impresses with its elegant and modern cube design with rounded edges and flawless workmanship. The U-shaped tempered glass extends from the front over the left side and even covers a small part of the back. The rounded shape gives the TK-2 2.0 Micro-ATX case its unique design and showcases your powerful hardware beautifully.

Plenty of Space for Hardware

The TK-2 2.0 Micro-ATX case features a dual-chamber design. In the main chamber, you can showcase your motherboard along with a GPU up to 405 mm in length. The right chamber houses the power supply and either two 3.5-inch drives or one 2.5-inch and one 3.5-inch drive. There is also ample space for cable management.

With dimensions of 300 by 435 by 408 millimetres, the TK-2 2.0 Micro-ATX case from Jonsbo is still quite compact, but it can accommodate full-sized gaming hardware inside. In addition to a Mini-ITX, Micro-ATX, or ATX motherboard, there is also space for graphics cards up to 405 millimetres long.

Motherboard Tray for Motherboards with Rear Connections

The motherboard tray is a special feature of this case. It has cutouts for motherboards with rear connections, such as those from ASUS's BTF series, GIGABYTE's Stealth project, or MSI's Project Zero. The cable routing from the motherboard is therefore direct and invisible into the second chamber for the power supply and drives.

Chimney Effect for Optimal Cooling

For cooling, three 120 mm fans can be mounted at the bottom. Three additional 120 mm fans can fit in the top of the elegant case and enhance the natural chimney effect, benefiting the cooling of all components. Alternatively, a 360 mm or 280 mm radiator can be attached to the top, and a 360 mm radiator can be mounted at the bottom. There is also room for three more 120 mm fans on the side. Air intake is provided by holes at the top, right side panel, and back. A dust filter is installed at the bottom, which can be removed and attached as needed. Ventilation holes also ensure cooling for the second chamber.

Discreet I/O Panel

The right chamber is finished at the front with an aluminium panel, discreetly housing the power switch, 3.5 mm audio jack, USB-C 3.1, and USB-A 3.0 ports.