- Midi Tower with front and side panel made of tempered glass
- Large mesh areas on the left side panel and top for excellent airflow
- Supports motherboards up to ATX and GPUs up to 420mm in length
- Two 140mm and one 120mm ARGB PWM fans pre-installed, with a total of eight possible
- Space for a 360mm radiator on the top, 240mm on the side, and 120mm at the back for optimal cooling
- Integrated PWM and ARGB hub for easier fan and lighting control
Montech KING 65 PRO Midi Tower in Detail
With the Montech KING 65 Pro, Montech offers a simple yet attractive PC case for gamers and hardware enthusiasts. The Midi Tower comes factory-equipped with advanced air cooling, allowing you to focus on installing your preferred gaming hardware. Additionally, the case impresses with its minimalist and clean look, especially thanks to the tempered glass front and side panel that fit seamlessly together.
Optimal Airflow with Large Mesh Panel
The three pre-installed fans provide ample airflow in the Montech KING 65 Pro, further supported by the large mesh areas integrated into the right side panel and the top. Two 140mm ARGB PWM fans are installed on the side, which can be replaced by two 120mm fans. There is space under the top for three 120mm or two 140mm fans. An additional 120mm ARGB PWM fan is pre-installed at the rear. Up to three 120mm or two 140mm fans can be installed at the bottom to improve the cooling of your graphics card. The CPU can be equipped with a cooler up to 175mm in height.
Ample Space for High-End Hardware
For advanced gaming hardware, the Montech KING 65 PRO offers plenty of space. The case supports motherboards up to the ATX form factor. Attached graphics cards can be up to 420mm long. There is a drive cage for either two 3.5-inch HDDs or three 2.5-inch SSD drives. Two additional 2.5-inch SSDs can be attached to the back of the motherboard tray.
On the side-mounted I/O panel, alongside a USB-C port and two USB 3.0 connectors, there is a 3.5mm socket for microphone and headphones, as well as a switch to control the lighting. The Montech KING 65 PRO comes with a pre-installed hub for controlling the lighting and fan speed.
- Dimensions: 300 x 442 x 475 mm (W x H x D)
- Material: Steel, Tempered Glass, Plastic
- Colour: White
- Form Factor: ATX, Micro-ATX, Mini-ITX
- Maximum fans possible:
Side: 2x 120 / 140 mm
Top: 3x 120 / 2x 140 mm
Rear: 1x 120 mm
Bottom: 3x 120 / 2x 140 mm - Pre-installed:
Side: 2x 140 mm (ARGB, PWM)
Rear: 1x 120 mm (ARGB, PWM) - Radiator mountings:
Side: max. 240 / 280 mm
Top: max. 360 / 280 mm
Rear: max. 120 mm - Filter: Bottom
- Drive bays:
2x 3.5/2.5 inch (HDD)
3x 2.5 inch (SSD) - ARGB / PWM Hub:
6x 4-Pin PWM
6x 3-Pin ARGB - Expansion slots: 7
- I/O Panel:
1x USB-C
2x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
1x 3.5 mm jack (4-pole, for microphone/headphones)
1x Power/Reset button
1x LED control (On/Off) - Maximum GPU length: 420 mm
- Maximum CPU cooler height: 175 mm
- Power supply: ATX, max. 185 mm length
Colour
|
|
Primary Colour
|
White
|
Fan Main Colour (Frame)
|
White
|
Fan Main Colour (Rotor)
|
White
|
Dimensions
|
|
Length / Depth
|
475 mm
|
Width
|
300 mm
|
Height
|
442 mm
|
Display
|
|
Display Included
|
No
|
Case
|
|
Case Type
|
Mid Tower
|
Motherboard Support
|
|
Compatible Motherboard Formats
|
ATX, Micro-ATX, Mini-ITX
|
Max. Motherboard Format
|
ATX
|
Internal Dimensions
|
|
Max. CPU Cooler Height
|
175 mm
|
Max. GPU Length
|
420 mm
|
Max. PSU Length / Depth
|
185 mm
|
Inner Volume
|
62.98 l
|
Power Supply
|
|
PSU Format
|
ATX
|
Power Supply Position
|
rear bottom
|
Fan Support
|
|
120 mm fans
|
9
|
140 mm fans
|
6
|
Radiator Support
|
|
Max. Radiator Compatibility
|
360
|
Drive Bays
|
|
2.5 inch internal drive bay
|
5
|
3.5 inch internal drive bay
|
2
|
1x 3.5 / 1x 2.5 Inch Internal Drive Bays (combined)
|
7
|
External Ports
|
|
USB 3.1 (external) Type C
|
1
|
USB 3.0 (external) Type A
|
2
|
Audio outputs & inputs
|
1x output + 1x input (3.5 mm jack, 3-pin, TRS)
|
Card reader
|
No
|
Case Features
|
|
I/O position
|
Front
|
Side panel
|
with mesh, with window
|
Front door
|
Yes
|
Cable Management
|
Yes
|
Filters Included
|
Yes
|
Remote included
|
No
|
Back Connect
|
|
Back Connect
|
No
|
Expansion Slots
|
|
Expansion slots / PCI slots
|
7
|
Materials
|
|
Materials
|
Steel, Tempered Glass
|
Lighting
|
|
Lighting / RGB
|
Yes
|
Fan / RGB control
|
Yes
|
Lighting Colour
|
RGB
|
Product Series
|
|
Product Series/Family
|
King
|
Additional Contents
|
|
Included fans
|
1x 120 mm, 2x 140 mm
|
Manufacturer Information | Caseking GmbH Gaußstraße 1, 10589 Berlin, Germany [email protected] |
Responsible Person | Caseking GmbH Gaußstraße 1, 10589 Berlin, Germany [email protected] |