Singularity Computer Spectre Integra-M Elite - silver

Discover the Spectre Integra-M Elite Distroplate

The Spectre Integra-M Elite replaces the front and/or top radiator panels with a distroplate for Spectre Integra-M and Spectre Integra-MA. This is positioned in an aesthetically pleasing transparent look, allowing for a great view of coolant and internal components. The Spectra Integra-M Elite Distroplate not only increases the liquid volume of your custom water cooling loop but also adds an aesthetic highlight to your setup. The Spectre 3.0 Integra Elite features an inlet and an outlet. When installed on the front panel, the ports are located at the top, and when installed on the top, the ports are positioned at the back to place them close to the ports of the case's main distribution plate.

Connections can be made to the water cooling components in the system and the main distribution plate Spectre 3.0. Radiators can still be attached, and with attached fans, there is still good ventilation around the distribution plate. An LED strip is positioned at the edge of the distribution plate, and an included ARGB 5V addressable 50 cm LED strip. Spectre 3.0 Integra Elite is compatible with all versions of Spectre 3.0, including the Limited Edition.

Installation and Assembly

The Spectre 3.0 Integra Elite Distroplate is installed in the same way as the standard front and top panels. The distribution plate must be removed from the radiator mounting plate for the radiator to be installed. Connections can be made to the water cooling components in the system and the main distribution plate Spectre 3.0 in any order, as long as the Elite flow is incoming and outgoing. Radiators can be mounted normally and have the same setup as the standard front and top panels of Spectre 3.0.

When using the Spectre Integra-M Elite on the front and top panels, the radiator thickness for both radiators is limited to 30 mm.